Need assistance? Call us: 1-800-663-4209
DPPT-Series
PLATINUM™ Series Universal Input Digital Panel Meters
Compteurs numériques à panneau à entrée universelle série PLATINUM™
Models In Stock
- Strain & Bridge Inputs, 6 Digit Display and Upgraded Platinum Software Now Available
- Super High Performance (20 Samples / Sec), High Accuracy
- Extremely Versatile yet Easy and Intuitive to Use
- Bright 3-Color (RED, GREEN, and AMBER) 9 Segment LED Display with Wide Viewing Angle
DPPT-Series
From
C$
391.68
Models In Stock
Product Overview
- A/D Conversion 24-bit sigma delta
- Accuracy 0.03 % FS
- Additional Features 1 Programmable 3 Color Display
- Approvals UL, cUL, CE, UKCA
- CMRR 120 dB
- Configuration Differential
- Cutout Dimensions 45 mm
- Data Interface Note Ethernet Standards Compliance: IEEE 802.3 10/100 Base-T auto-switching, TCP/IP, ARP, HTTPGET Protocols: OMEGA ASCII, MODBUS® ASCII/RTU
- Display Range -1999 to 9999
- External Fuse Required Time-Delay, UL 248-14 Listed: 100 mA/250 V; 400 mA/250 V (low voltage option) ;Time-Lag, IEC 127-3 Recognized: 100 mA/250 V; 400 mA/250 V (low voltage option)
- Frequency 50 to 400 Hz
- Height 48 mm
- Impedance Input Process/Strain: 10M Ω for ±100 mV, 1M Ω for other voltage ranges ;Process Current: 5 Ω ;Thermocouple: 10K Ω max
- Input Current 4 to 20 mA, 0 to 24 mA
- Input Type Thermocouple, RTD, Thermistor, Current, Voltage, Strain
- Input Voltage -100 to 100 mV, -1 to 1 V, -10 to 10 Vdc
- Isolation Power to Input/Output: 2300 Vac per 1 min test; 1500 Vac per 1 min test (low voltage/power option) Power to Relays/SSR Outputs: 2300 Vac per 1 min test Relays/SSR to Relay/SSR Outputs: 2300 Vac per 1 min test RS232/RS485 to Inputs/Outputs: 500 Vac per 1 min test
- Length 127 mm
- Measuring Range Process Voltage: ±50 mV, ±100 mV, ±1, ±10 Vdc;Process Current: Scalable within 0 to 24 mA;Thermocouple;Type J: -210 to 1200 °C ;Type K: -270 to 160 °C and -160 to 1372 °C;Type T: -270 to -190 °C and -190 to 400 °C;Type E: -270 to -220 °C and -220 to 1000 °C;Type R: -50 to 40 °C and 40 to 1788 °C;Type S: -50 to 100 °C and 100 to 1768 °C;Type B: 100 to 640 °C and 640 to 1820 °C;Type C: 0 to 2320 °C;Type N: -250 to -100 °C and -100 to 1300 °C;RTD;Pt, 0.00385, 100 Ω, 500 Ω, 1000 Ω: -200 to 850 °C;Pt, 0.003916, 100 Ω: -200 to 660 °C;Pt, 0.00392, 100 Ω : -200 to 660 °C;Thermistor;2252 Ω: -40 to 120 °C;5K Ω: -30 to 140 °C;10K Ω: -20 to 150 °C
- Number of Inputs 1
- Operating Temperature, Max 50 °C
- Operating Temperature, Min 0 °C
- Operating Temperature Note 0 to 50°C (32 to 122°F), 90% RH non-condensing
- Polarity Bipolar
- Power Consumption 4 W
- Reading Rate 20/sec
- Relative Humidity 0.9
- Resolution 0.1° temperature; 10 µV process
- RTD Input Range 100/500/1000 Ω Pt sensor, 2-, 3- or 4-wire; 0.00385, 0.00392 (100 Ω only), or 0.003916 (100 Ω only) curves
- Sampling Rate 20 Hz (20 updates/second)
- Sensor/Transmitter Power 5, 10, 12 and 24 Vdc @ 25 mA
- Sensor/Transmitter Power Note Firmware selectable (no jumpers to set) to 5, 10, 12, and 24 Vdc @ 25 mA
- Series ID DPPT-Series
- Strain Input ± 50 mV, ± 100 mV
- Supply Power Note 90 to 240 Vac ±10%, 50 to 400 Hz*, 110 to 375 Vdc, equivalent voltage
- Temperature Stability RTD: 0.04°C/°C ;TC@ 25°C (77°F): 0.05°C/°C ;Cold Junction Compensation Process: 50 ppm/°C
- Thermistor Input Range 2252 Ω, 5K Ω, 10K Ω
- Thermocouple Type J, K, T, E, R, S, B, C, N
- Warm Up Time 30 mins
- Width 48 mm
La gamme PLATINUM Series, leader du secteur, de compteurs numériques à panneau basés sur microprocesseur offre une flexibilité inégalée dans la mesure des processus. Tout en étant extrêmement puissant et polyvalent, ce produit a été conçu avec le plus grand soin pour être très facile à configurer et à utiliser. La reconnaissance automatique de la configuration matérielle élimine le besoin de cavaliers et permet au micrologiciel de se simplifier automatiquement, en supprimant toutes les options de menu qui ne s'appliquent pas à une configuration spécifique.
Chaque unité permet à l'utilisateur de sélectionner le type d'entrée parmi 9 types de thermocouples (J, K, T, E, R, S, B, C et N), des RTD Pt (100, 500 ou 1000 Ω, avec une courbe 385, 392 ou 3916), des thermistances (2250 Ω, 5K Ω et 10K Ω), une tension continue ou un courant continu, et des entrées de contrainte et de pont. Les entrées de tension ou de courant bipolaires sont entièrement modulables pour s'adapter à pratiquement toutes les unités techniques, avec un point décimal sélectionnable qui est parfait pour une utilisation avec la pression, le débit ou d'autres entrées de processus.
Deux alarmes peuvent être configurées pour un déclenchement au-dessus, en dessous, haut/bas et par bande en utilisant des points de déclenchement d'alarme absolus ou par écart. De plus, une indication haut-haut/bas-bas est disponible. Les deux relais mécaniques unipolaires à double jet optionnels peuvent être attribués à l'un ou aux deux déclencheurs d'alarme. Deux annonciateurs et trois couleurs d'affichage peuvent également être attribués aux déclencheurs d'alarme. Un affichage à 6 chiffres est désormais disponible. L'alimentation universelle accepte une tension de 90 à 240 Vca. L'option d'alimentation basse tension accepte une tension de 24 Vca ou de 12 à 36 Vcc.
Communications Ethernet et série intégrées
L'Ethernet intégré en option sur les modèles DIN 1Ω16 et 1Ω8 permet aux appareils de se connecter directement à un réseau Ethernet et de transmettre des données dans des paquets TCP/IP standard, ou de servir des pages Web sur un réseau local ou Internet. Des communications série en option sont également disponibles, configurables en RS232 ou RS485, avec des commandes ASCII simples ou MODBUS®. Les trois types d'interfaces de communication (USB, Ethernet et série) peuvent être installés et actifs simultanément.
*Si vous disposez de la version précédente du micrologiciel 1.3.0.25, veuillez la mettre à niveau vers la dernière version.
En savoir plus
Découvrez la série DPPT dans différentes applications :
Mise à l'échelle de la sortie de courant analogique
Contrôle du four à double sortie
Intégration Kepware
Guide de démarrage du contrôleur Platinum
Traitement de la rampe de stabilisation Platinum
Platinum Setpoints Alarmes and Sorties
Applications de la contrainte du platine
Contrôle à distance des points de consigne
Contrôle du four à double sortie
Intégration Kepware
Guide de démarrage du contrôleur Platinum
Traitement de la rampe de stabilisation Platinum
Platinum Setpoints Alarmes and Sorties
Applications de la contrainte du platine
Contrôle à distance des points de consigne
PDFs & Manuals
Software & Drivers
Accessories
cables
meters/controllers
Show Ratings & Reviews
Rated 4 out of
5
by
JonT from
Basic DAQ
For a basic data acquisition this part works fine. I had to call into omega for help navigating the menu to get the scaling correct for the 4-20mA, 0-1000psi pressure transducer. If all you need to do is acquire and log data from display this part is just fine.
Date published: 2018-05-23
Rated 5 out of
5
by
Kevinn from
Gets the job done
Needed to connect different pressure transducer types. The set up was a bit confusing (always hate 100+ page manuals) but tech support was able to assist with no problems. All issues were resolved.
Date published: 2018-11-08
Rated 1 out of
5
by
BURT from
UNHAPPY
VERY HARD TO PROGRAM NO BASIC EXAMPLE PROGRAM. PLAN TO SPEND DAYS PROGRAMMING
Date published: 2018-03-08
Rated 5 out of
5
by
Mazi from
SERAIL COMMUNICATION
We have a DP8EPT-006 (Serial # M20430706). We want to know if we can get a serial output from this panel.
Date published: 2024-07-22
Rated 5 out of
5
by
Julian Mesa from
Purchasing Agent
Works flawlessly and was delivered in a quick manner!
Date published: 2024-05-13
Rated 5 out of
5
by
GWILLIAMS from
PLATINUM DIGITAL METERS
These digital meters were a perfect match and were received in a timely manner.
Date published: 2023-11-17
Rated 5 out of
5
by
Mohamed Kandil from
Good product
The meter quality is good and installation instruction is clear
Date published: 2023-10-03
Rated 4 out of
5
by
Ted Bellanger from
Digital meter
Meter was easy to set up. Display of numbers were is to read
Date published: 2023-05-08
Externally exciting a pressure transducer with 24vdc & a 0-10V output, how is this wired with only one output wire from the transducer?
Assuming you are talking about a 3 wire Voltage output pressure sensor with +IN, Common and +OUT connections. Wire as follows. +IN to Term#6, Common to Term3#. +OUT to Term#2. Jumper Term#3 to Term#8
Date published: 2025-01-23
The Platinum User Guide and manual do not mention factory calibration. Do these units go through a calibration process? If so. is it traceable to NIST? Or do you consider calibration to be something that is done to analog devices only? Thanks.
Thank you for your inquiry. Unit is shipped fully calibrated from factory.
Date published: 2021-01-30
I need a temperature gage that will read Liquid Nitrogen temp. -320°F I found this series, PLATINUM™ Series Digital Panel Meters, or do you have a self contained temp gage?
Hi mikek,
Thank you for the inquiry. We do not offer fixed mount integrated meter probe combination for Liquid N2 application.
Best regards
OMEGA
Date published: 2020-03-25
Is this device working with strain gauges (i.e. I.E.E. Low Profile Strain Gauge) directly? Is it possible to connect multiple sensors simultanisouly?
This device can cbe connected to one strain gauge.
Date published: 2025-01-16
does the dp8pt-dc have battery backup
Thanks for connecting with Omega. Part number DP8PT-DC does not have battery backup. You do not need to reprogram when power is lost. This unit will retain all the configuration parameters in non-volatile memory. Please email our Tech Support rep back if you have any further questions.
Date published: 2024-02-07
The DPT8 lists a low power option allowing the device to be powered by 24VAC (or 12-36V DC) on the data sheet, but it is not clear what model(s) are associated with this option. The models are listed as being either AC or DC powered only.
Hi Richard,
Thanks for the inquiry. Models are available with the low voltage (power) option and this option is indicated with a suffix "-DC".
Please see data sheet for options table; https://assets.omega.com/pdf/process-control-and-monitoring-devices/meters/process-meters/DPPT_Series.pdf
Date published: 2020-05-15
What is the ethernet settings password? I searched all the manuals for "password" and for "login" and I didn't find the webpage password for ethernet settings.
Hi MTen,
Default login password is "12345678" and administrator password is "00000000".
Best regards
OMEGA
Date published: 2024-01-16
Is the front panel rain-resistant?
Hi Vincent30
Thank you for the request. The 1/8 DIN size bezel is rated NEMA1. The 1/32 and 1/16 size are rated NEMA 4X. We do not recommend any of these where there is exposure of the bezel to weather condition.
Best regards
OME
Date published: 2022-10-05
RoHS 2015/863 - View Certificate
CE Approved
UKCA