Need assistance? Call us: 1-800-663-4209
CN730-Series
1/4 DIN Temperature Controllers with Autotune, Alarms and RS485
Contrôleurs de température 1/4 DIN avec autotune, alarmes et RS485
Models In Stock
This item is discontinued. Please see the CND3-SERIES as a possible alternatives. Contact Engineering if you have any questions
- Dual Display
- Autotune
- RS-485 Communications
- Free Software
CN730-Series
From
C$
281.52
Models In Stock
Product Overview
- Accuracy ± 0.25 %
- Accuracy Detail ± 0.25% span, ± 1 least significant digit
- Cutout Dimensions 92 × 92 mm
- Data Interface RS485 Modbus
- Depth Behind Panel 79.2 mm
- Display Type 4 Digit LED
- Display Type Note Two 4-digit, 7-segment, LEDs PV: Red, 19 mm H (0.75") SV: Green, 12.7 mm H (0.5")
- Enclosure Ratings IP66
- Form factor 1/4 DIN
- Height 96 mm
- Input Type Thermocouple, RTD, Thermistor
- Length 15.8 mm
- Measurement Type Temperature
- Measuring Range Type B: 100 to 1800°C Type S: 0 to 1700°C Type R: 0 to 1700°C Type N: -200 to 1300°C Type E: 0 to 600°C Type T: -20 to 400°C and -200 to 400°C Type J: -20 to 400°C and -100 to 850°C Type K: -200 to 1300°C and -200 to 500°C Type L: -200 to 500°C Type U: -200 to 800°C Pt100Ω RTD: 0 to 100°C, -20 to 500°C, -200 to 600°C
- Memory Backup Non-Volatile
- Number of Control Outputs 1
- Number of Inputs 1
- Operating Temperature, Max 50 °C
- Operating Temperature, Min 0 °C
- Series ID CN730-Series
- Supply Power Note 100 to 240 Vac, 50/60 Hz
- Supply Power Type AC
- Supply Voltage 100 to 240 Vac
- Weight 425 g
- Width 96 mm
Les régulateurs de température DIN 1/4 de la série CN730 offrent des menus de programmation faciles à utiliser, conçus pour une installation rapide. Les fonctions de contrôle comprennent ON/OFF, PID, auto-tune style="text-align: centering ou réglage manuel. La série CN730 est disponible avec une sortie relais, impulsion CC ou courant avec deux sorties d'alarme supplémentaires. Les sorties d'alarme peuvent être configurées à partir de 12 réglages préprogrammés différents. La série CN730 accepte une variété d'entrées thermocouples et RTD. La valeur du processus et la valeur de consigne sont affichées simultanément, la valeur du processus en rouge et la valeur de consigne en vert.
PDFs & Manuals
Software & Drivers
Show Ratings & Reviews
Rated 4 out of
5
by
Project Engineer from
Decent little controller
These little controllers come with a good array of features for the price. However, the mounting clips they come with are cheap, easily broken, and very difficult to get replacements without ordering a whole new controller.
Date published: 2016-09-02
Rated 5 out of
5
by
CIL Inc from
Powerful controller
Very flexible programming. Easy to set up. Difficult to navigate.
Date published: 2024-02-12
Rated 5 out of
5
by
Trevor H from
Great Temp Controller
Controller was easy to install and program. It’s operation is simple and efficient. Very good quality build. I will use this brand for process controllers moving forward.
Date published: 2020-05-20
For the Current Output option, when the controller is tuned correctly, is the 4-20mA output altered to maintain the setpoint or is it just a constant pulse?
Thank you for your inquiry DJ92. A 4-20 mA output changes depending on how close or far away you are from the setpoint. Therefore, a 4-20 mA is not a constant pulse.
Date published: 2024-09-30
Is the relay electromechanical or solid state? Is the relay enclosed?
The CN733 has one Relay: SPST, 5A @ 250 Vac resistive. Thanks for connecting with Omega. Please contact our Tech Support with any further questions.
Date published: 2019-05-15
I can no longer enter auto tune. When I get to the AT selection, I can't select ON. Is there some way to restore auto tune functionality?
Hi Anonymous,
Please check that you are in PID mode and not in the Program mode for ramp soak.
Best regards
OMEGA
Date published: 2021-03-27