1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
CN740-Series
Contrôleurs de température DIN 1/16 avec autotune, alarmes et RS485
Modèles en stock
Cette série de produits a actuellement un délai de livraison prolongé. Pour un remplacement potentiel, veuillez consulter la série CN4000 ou la série CNPT
- Régulateur de température 1/16 DIN avec double affichage
- Autotuning
- Communications RS-485
- Logiciel gratuit
CN740-Series
À partir de
C$
247.70
Modèles en stock
Aperçu du produit
- Précision ± 0.25 %
- Précision ± 0,25 % de l’étendue, ± 1 chiffre le moins significatif
- Interface de données RS485 Modbus
- Profondeur derrière le panneau 80 mm
- Taille d'affichage 6,35 mm (0,25 po)
- Type d'affichage LED à 4 chiffres
- Type d'affichage Remarque Affichage double 3,5 chiffres, Deux LED à 7 segments, 4 chiffres, 6,35 mm H (0,25") PV : Rouge SV : Vert
- Caractéristiques nominales du boîtier IP66
- Facteur de forme 1/16 DIN
- Bordure avant 48 mm²
- Type d'entrée Thermocouple ; RTD ; Thermistance
- Type de mesure Température
- Plage de mesure Type B : 100 à 1800°C, Type S : 0 à 1700°C, Type R : 0 à 1700°C, Type N : -200 à 1300°C, Type E : 0 à 600°C, Type T : -20 à 400°C, -200 à 400°C, Type J : -20 à 400°C, -100 à 850°C, Type K : 200 à 1300°C, -200 à 500°C, Type L : -200 à 500°C, Type U : -200 à 800°C, RTD : 0 à 100°C, -20 à 500°C, -200 à 600°C
- Sauvegarde de la mémoire Non volatil
- Nombre de sorties de commande 1
- Nombre d'entrées 1
- Température de fonctionnement, max 50 °C
- Température de fonctionnement, min 0 °C
- Épaisseur maximale du panneau 9.5 mm
- ID de série CN740-Series
- Approvisionnement Remarque 100 à 240 VCA, 50/60 Hz
- Type d'approvisionnement électrique CA
- Tension d'alimentation 100 à 240 Vca
- Poids 114 g
Les régulateurs de température de la série CN740 offrent une mesure et un contrôle précis de la température dans un boîtier 1/16 DIN. Conçue pour un contrôle direct ou inverse (refroidissement ou chauffage), la série CN740 peut être programmée pour des fonctions de contrôle ON/OFF simples ou des fonctions de contrôle PID plus complexes. Le contrôle PID est pris en charge avec un réglage manuel ou automatique. Sélectionnez la sortie relais, impulsion CC ou courant pour les méthodes de contrôle. La série CN740 accepte une variété d'entrées thermocouples et RTD. La valeur du processus et la valeur de consigne sont affichées simultanément sur la grande double LED. Le réglage automatique, les unités techniques (°F ou °C) et l'état de l'alarme sont également indiqués sur la plaque frontale. L'appareil comprend deux sorties d'alarme avec 12 fonctions d'alarme préprogrammées.
PDF & Manuels
Logiciels & Pilotes
Afficher les évaluations et les avis
Rated 5 out of
5
by
Just some guy from
inexpensive, works well.
I use this controller to maintain the temp in a molten salt furnace. With the auto tune it holds a constant temp with minimal over shoot and fast reaction time.
Date published: 2016-03-03
Rated 2 out of
5
by
Mr Z from
Reliability is marginal
Originally had six units, three failed after 1 year. The internal relay contacts became intermittent, one fused in the "on" position. They are only switching 2 amps, and are rated for 5.
Date published: 2017-02-24
Rated 5 out of
5
by
John Orzechowski from
CN9000A Replacement
Perfect replacement to the CN9000A, to be used in a NASCAR Oil Temperature Heater control for warming the engine oil and circulation before the engine is started. With this ability we don't have keep as close as an eye on the oil temperature in the tank while working this process that takes approximately 1 hour.
Date published: 2025-09-07
Rated 4 out of
5
by
MaryP from
1/16 DIN Temperature Controllers
Product works well and can easily be integrated with most controls systems. The only complaint is that the lead time is often quite long if the items are not in stock.
Date published: 2023-11-06
Rated 2 out of
5
by
MDIAS LLC from
Incorrect controller purchased
Cannot give a good rating becauae I was unable to use this product due to incorrect purchase. I found it difficult to select the correct type of controller on the site.
Date published: 2023-03-12
Rated 5 out of
5
by
oventec from
good price,
works perfec, twe can use for temperature, RH, presu
Date published: 2021-10-16
Rated 5 out of
5
by
John6800 from
Controller features have On/Off and PID Control
Because this controller has both On/Off & PID Control I was able to configure it to my oven.
Date published: 2018-03-28
Rated 5 out of
5
by
Bobble from
Great Service
Bought this recently and pleased that I did, it performs as advertised.
Date published: 2017-10-26
For the CN745, I did not see an "Output" option in the Communication Parameters List. Does this exist?
Thank you for the inquiry. Please forward this question to TEMP@OMEGA.COM so that we can better support you.
Best regards
OMEGA
Date published: 2021-09-13
for CN745, the product does require any solid state relay? I am not sure that in case of current output control any solid state relay is required. Could you recommend any solid state relay or items which are required to be purchased with the CN745?
Output #1 is an analog control output that can be programmed using the PID tuning parameters.to control your process. You can either manually tune the PID values, or use Auto tune providing the process is for temperature and you have a set point at least 100 degrees (C or F) above your starting ambient temperature.
Date published: 2021-09-13
Can this model be used for over-temperature protection?
Hi Kathy,
The CN743 would not be recommended for use as a limit controller. The CN2516-R1 would be a 1/16 DIN size controller that would be suited for use as an over-temperature limit controller. It has the ability to latch which is what you'll want as a feature in a true limit controller.
Date published: 2021-09-13
Can you please share connection for CN743 with out SSR? I need to connect it with out using SSR. Please share the power supply connection for this.
Thank you for your inquiry. Due to this being a more complicated issue please call 1-888-826-6342, ask for Temperature Engineering or send an email to temp@omega.com
Date published: 2023-06-09
Does CN740 comes with mounting bracket?
Thank you for your inquiry. The mounting bracket is included.
Date published: 2023-11-22
I would like to speak with a technical rep regarding the operation of the CN74-3 temp controller. I am Working from Home (WFH). I do not have controller in front of me (located 34 miles from here).
Thank you for your inquiry. Feel free to call our Temperature Group at 1-888-826-6342 to discuss application. We are available until 6:30 EST
Date published: 2021-09-13
Does cn743 model comply with REACH and RoHS ?
Thank you for your inquiry. Unfortunately this product does not comply with RoHS and/or REACH.
Date published: 2022-07-07
Does CN743 require SSR? Can you please explain connection in video? By the Data file i can not understand the connections.
Thank you for the inquiry. The answer will depend on if your load pulls over the maximum current rating for the CN743's relay, which is 5 Amps. If your load pulls under 5 Amps, you will not require an SSR.
Date published: 2023-06-09