Need assistance? Call us: 1-800-663-4209
OM-CP-PRHTEMP101A-Logger
Pressure, Humidity and Temperature Data Logger
Models In Stock
- 10 Year Battery Life
- 1 Second Reading Rate
- Multiple Start/Stop Function
- Ultra High Speed Download
OM-CP-PRHTEMP101A-Logger
From
$
404.21
Models In Stock
Product Overview
- Alarm Note Programmable high and low limits; alarm is activated when recording environment reaches or exceeds set limits (pressure channel only).
- Battery life up to 10 yr
- Battery Size and Type 3.6V Li-ion
- Calibration Digital calibration through software
- Data Interface USB
- Data Interface Note USB (interface cable required); 115,200 baud
- LED Indicators Green LED Blinks: 10 second rate to indicate logging 15 second rate to indicate delay start mode; Red LED Blinks: 10 second rate to indicate low battery and/or full memory 1 second rate to indicate an alarm condition
- Length 36 mm
- Measurement Type Humidity, Pressure, Temperature
- Memory 412876
- Memory Note Manual or Trigger Mode, Memory Reading Per Channel 688128
- Number of Measurements 3
- Operating Temperature, Max 80 °C
- Operating Temperature, Min -40 °C
- Pressure Calibrated Accuracy 10 mbar
- Measurement Pressure, Max 1300 mBar
- Measurement Pressure, Min 250 mBar
- Pressure Resolution 0.02 mbar
- Pressure Sensor Type Piezo resistive
- Real Time Recording The device may be used with a PC to monitor and record data in real time.
- Relative Humidity Accuracy ± 3% RH
- Relative Humidity Accuracy Note ± 3% RH (± 2% RH typical @ 25°C)
- Relative Humidity, Max 0.95
- Relative Humidity, Min 0%
- Relative Humidity Resolution 0.001
- Relative Humidity Sensor Type Capacitive Polymer
- Samples,Max 670000
- Sampling Rate 0.5 Hz (2 seconds between updates)
- Sampling Rate Note 1 reading every 2 seconds to 1 every 12 hours
- Series ID OM-CP-PRHTEMP101A-Logger
- Software Compatibility Windows XP SP3/Vista/7 and 8 (32-bit and 64-bit)
- Supply Power Type Battery
- Temperature Accuracy ± 0.5 °C
- Temperature Measurement, Max 80 °C
- Temperature Measurement, Min -40 °C
- Temperature Resolution 0.01 °C
- Temperature Sensor Type RTD
- Temperature Sensor Type Note Precision RTD Element
- Time Accuracy ± 1 minute/month @ 25 °C
- Weight 24 g
- Width 56 mm
Supported Applications
The OM-CP-PRHTTEMP101A is a compact, portable pressure, relative humidity and temperature data logger. Its small size and long deployment life make it well suited to museum and archive preservation, shipping and transportation, warehouse monitoring, and HVAC work. Because it records all three parameters at once, it gives a complete environmental picture in a single device.
The logger also serves demanding controlled environments such as clean rooms, clinical laboratories, and altitude validation studies, where pressure, humidity and temperature must be tracked together. The device is not designed for patient-connected applications.
Operating Conditions & Performance
The OM-CP-PRHTTEMP101A measures pressure over a range of 250 to 1300 mbar with a resolution of 0.02 mbar and a calibrated accuracy of 10 mbar, using a piezoresistive sensor. Relative humidity is measured over 0 to 95 %RH non-condensing with a capacitive polymer sensor, a resolution of 0.1 %RH and a calibrated accuracy of 3% RH.
Temperature is measured with a precision RTD element over -40 to 80°C (-40 to 176°F), with a resolution of 0.01°C (0.018°F) and a calibrated accuracy of ±0.5 °C (0.9°F). The ambient operating range is -40 to 80°C (-40 to 176°F).
The reading rate is selectable from 1 reading every second up to 1 reading every 24 hours, and memory holds 688,128 readings per channel with software configurable memory wrap. The included 3.6V lithium battery is user replaceable and supports a 10 year battery life. On-board LEDs indicate status: a green LED blinks at a 10 second rate to indicate logging and at a 15 second rate to indicate delay start mode or standby, while a red LED blinks at a 10 second rate to indicate low battery and/or full memory and at a 1 second rate to indicate an alarm condition met.
Configuration Options
This series is offered as a single configuration, the OM-CP-PRHTTEMP101A. It combines pressure, humidity and temperature sensing in an ABS Plastic housing that measures 36 L x 56 W x 16 mm D (1.4 x 2.2 x 0.6") and weighs 24 g (0.8 oz). The device carries CE marking and is backed by a 5 YEAR WARRANTY.
Capability can be extended through accessories. Operation requires the OM-CP-IFC200 Windows software package, which is sold separately and includes a USB interface cable. An optional NIST calibration certificate is available and is ordered as the OM-CP-PRHTTEMP101A-CERT. For regulated environments, the OM-CP-SVP-SYSTEM adds FDA 21 CFR part 11 compliant IQ/OQ/PQ software validation. Replacement power is supplied by the OM-CP-BAT105 3.6V lithium battery.
Key Product Differences
- OM-CP-PRHTTEMP101A - Pressure, humidity and temperature data logger
- OM-CP-PRHTTEMP101A-CERT - Pressure, humidity and temperature data logger and NIST calibration certificate
- OM-CP-IFC200 - Windows software and 1.8 m (6') USB interface cable
- OM-CP-SVP-SYSTEM - FDA 21 CFR part 11 compliant IQ/OQ/PQ secure software validation workbook and software package (unlimited users, license per computer)
- OM-CP-BAT105 - Replacement 3.6V lithium battery
PDFs & Manuals
Software & Drivers
Accessories
accessories
cables
consumables
Show Ratings & Reviews
Rated 5 out of
5
by
Nancy Amaya from
Quick response al the time!
I already bought this equipment a few days ago and I'm glad with all the performance while placing PO's via web.
Date published: 2017-06-02
Rated 1 out of
5
by
Eric34 from
Need to buy a wireless Transmitter to communicate
The unit looks half decent, but then i realized that is doesn't have any usb port on it. Turns out you have to spend another 200$ to buy a wireless transmitter to talk to the data logger.
Date published: 2022-03-10
Is it possible to clear the memory on the dataloggers? If so, how would I do that? Or do I have to wait until Memory Wrap?
Hello, thank you for your question.
The previous data is automatically erased every time to you start a new logging session, so there is no need to manually erase it.
Date published: 2021-05-10
Is the Omega software compatible with Windows 10 operating system?
Thank you for your question. Yes, the software for OM-CP logger is Win 10 compatible.
Date published: 2023-09-01
We purchased the OM-CP-PRHTEMP101A. We have two data cables already the OM-CP-IFC200 USB. The USB cables connect, and the lights are on, but does not show up as an available device in the OM-CP data logger software (OM-CP_4_2_25_11).
We will require more information to help on this question, please email the DAS team at DAS@dwyeromega.com
Date published: 2023-12-22
According to the manual, this monitor (OM-CP-PRHTEMP101A) requires annual calibration. Do we send it back to omega to have this done? If so, how long does it take, and how much does it cost. If not, who can do the calibration? Thank you!
The software does include the ability to calibrate the unit however you must have a humidity/temperature/pressure chamber to do that. If you do not have that equipment than please contact our customer service department at 800-872-9436 they can give you a quote with pricing and lead time for the calibration.
Date published: 2020-06-11
The manual for the OM-CP-PRHTEMP101A indicates the alarm settings are for only pressure and not temperature nor humidity. Is that true?
Thank you for your question. We will require more information to help on this question, please email the DAS team at DAS@OMEGA.COM
Date published: 2023-09-13
Could this be used with linux for live data logging? (e.g. Does it use a standard serial communication protocol, or Mass Storage Device?) Or is it only possible to get data with the windows software?
Thank you for your question. Unfortunately, there is no protocol available for custom programming. You must purchase OM-CP-IFC200 ( software and cable) to configure he logger.https://www.omega.com/en-us/data-acquisition/data-acquisition-modules/p/OM-CP-IFC200
Date published: 2021-05-25
What does memory wrap means please ?
Hello
Memory Wrap means that during a recording session, once the logger runs out of memory, it will start back to the first memory block and overwrite from there to continue logging.
Date published: 2020-06-12
The Item# OM-CP-PRHTEMP101A shown in the manual appears to have a headphone-type jack. Is the cable to connect the Item# OM-CP-PRHTEMP101A to the computer USB provided with it, or is that a separate purchase? No cable is listed in accessories.
Thank you for your question. The OM-CP-IFC200 interface cable is required to configure the logger.
https://www.omega.com/en-us/data-acquisition/data-acquisition-modules/p/OM-CP-IFC200
Date published: 2023-09-05