Taiwan 0809 090 375 | Intl +65 6415 5353 | Welcome to our new site - found a bug? Please report it here
Back To Top
[+]
DIN Rail Signal Conditioners
Added to Your Shopping Cart
The DMD4059 Series converts wheatstone strain bridge sensors, pressure transducers, or load cell signals into process current or voltage. Offered with AC or DC Power.
| Product Number | Input Type |
|---|---|
|
|
Low Voltage
|
|
|
Voltage
|
| Product Number | Input Type |
|---|---|
|
|
Frequency
|
TXDIN101 has thermocouple, RTD, and mV input with 4-20mA output. LED display, configuration TX69-CABLE sold separately required to program via PC.
| Product Number | Input Type |
|---|---|
|
|
Thermocouple, RTD, Voltage
|
The TXDIN70 series provide two channel transmitters or isolators with 4-20 or 0-20 mA output. Programmable input types with TXDIN70-DISPLAY accessory (sold separately)
| Product Number | Input Type | Supply Voltage | Voltage Measurement Range |
|---|---|---|---|
|
|
Thermocouple, RTD, Voltage
|
100 to 240 Vac, 24 Vdc
|
0 to 20 mV, 0 to 60 mV, 0 to 100 mV, 0 to 1V, 0.2 to 1V
|
|
|
Thermocouple, RTD, Voltage
|
24 Vdc
|
0 to 20 mV, 0 to 60 mV, 0 to 100 mV, 0 to 1V, 0.2 to 1V
|
The DRST-CM is a programming display for DRST-AC, DRST-DC, DRST-UN & DRST-UR. Supports Modbus over RS-485. Monitors process value on built in display.
| Product Number | Display Type |
|---|---|
|
|
N/A
|
TXDIN1600S strain gage/load cell transmitter accepts 0.2 to 7.5 mV/V inputs with 5V excitation. Universal current, bipolar voltage output. Remote tare, front panel config.
| Product Number | Input Type |
|---|---|
|
|
Four Wire Bridge Ratiometric
|
The DRST-FR converts frequency/pulse inputs to a 4-20mA or 0-10V DC output. PNP/NPN output, relay output. Universal power supply. Configurable with TXUN-KIT device.
| Product Number | Input Type |
|---|---|
|
|
Frequency
|
The DRSL-TC Series are isolated or non-isolated thermocouple input signal conditioners. Accepts Type J and Type K TC's. DIP switch selectable ranges, slim housing.
| Product Number | Input Type |
|---|---|
|
|
Thermocouple
|
|
|
Isolated thermocouple
|
The DRSL-RTD is either isolated or non-isolated with 2, 3, or 4-wire Pt100 RTD input. Pre-calibrated temp ranges selectable via DIP switch. Slim housing, high accuracy.
| Product Number | Accuracy |
|---|---|
|
|
± 0.1 %
|
|
|
± 0.05 %
|
The DRSL-RTD-LP is a 2, 3, or 4-wire PT100 RTD input conditioner. Output loop powered with high accuracy and slim housing. Pre-calibrated temp range DIP switch selected.
| Product Number | Input Type |
|---|---|
|
|
RTD
|
| Product Number | Input Type |
|---|---|
|
|
Thermocouple, RTD,Thermistor, Resistance, Potentiometer, Current, Voltage
|
The DRSL-U is a universal input conditioner that accepts thermocouple, RTD, resistance, potentiometer, voltage or current input. Configured w/ DRSL-DISPLAY programmer.
| Product Number | Input Type |
|---|---|
|
|
Thermocouple, RTD, Resistance, Potentiometer, Current, Voltage
|
The DRSL-DC1-DC2 Conditioners have a DC current and voltage input and isolated and converted DC current and voltage output. DIP switch selectable range. 0.05% accuracy
| Product Number | Power Consumption |
|---|---|
|
|
1.2 W, Internal - max 0.65 W
|
CCT DIN rail conditioners that accept various input signals, such as voltage and current, frequency, temperature (TC and RTD), and provide 0/4 to 20 mA, or 0 to 10 Vdc.
| Product Number | Current Measurement Range | Frequency Measurement Range | Input Type | Supply Voltage | Temperature Measurement Range | Voltage Measurement Range |
|---|---|---|---|---|---|---|
|
|
N/A
|
N/A
|
Voltage
|
110 Vac
|
N/A
|
0 to 100 Vdc
|
|
|
N/A
|
N/A
|
Voltage
|
220 Vac
|
N/A
|
0 to 10 Vdc
|
DR-IO Conditioners convert TTL levels to PLC levels and vice versa. Logic levels switch high level AC/DC circuits and vice versa. Wide logic voltage range and Low profile.
| Product Number | ||
|---|---|---|
|
|
||
|
|
N/A
|
N/A
|
The DRSP-I Series are DC current splitters that take one 4-20mA input to two 4-20mA outputs w/ AC or DC power. Zero and span adjustments for each output, status LEDs.
The LDX-D is a DIN rail mount AC LVDT transducer that operates on 10-30Vdc power with selectable process outputs. Adjustable signal polarity, span, and offset.
| Product Number | Input Type |
|---|---|
|
|
AC Voltage
|
TXDIN1600 series has a universal thermocouple, RTD, or process input and 4-20mA output. Configuration via USB cable (sold separately). Push button user trim, relay output
| Product Number | Relay Output |
|---|---|
|
|
N/A
|
The DRA-RTT-2 is a DIN Rail loop powered signal conditioner with RTD input and 4-20mA linearized output. It has ± 0.1% accuracy and is field rangeable and low cost.
| Product Number | Input Type |
|---|---|
|
|
RTD
|
The DRG-SC Series Conditioners have models with TC, RTD, Pot, Freq., AC/DC Voltage/Current, Strain/Bridge inputs and field configurable outputs from 0-5V, 0-10V, 0-20mA.
| Product Number | Input Type |
|---|---|
|
|
RTD
|
DIN Rail Signal Conditioners
DIN Rail Signal Conditioners support data acquisition workflows by helping ...