Netherlands 07077 03815 | Intl +31 (0) 7077 03815 | Welcome to our new site - found a bug? Please report it here
FST320-Series
Thermal Dispersion Flow Switches for Use With Gases
- Measure Mass Flow of Gases
- High Reliability, No Moving Parts
- Effectively Monitor Critical Gas Flows
- May Be Used in Small Piping or Large Ducts
FST320-Series
From
€
293,38
Product Overview
- Accuracy ± 5 %
- Accuracy Detail ±5% of setpoint at constant temperature and flowrate
- Additional Features 1
- Adjustments Potentiometer
- Approvals CE
- Approvals Note CE compliance: EN 61326 EMC EN 61010‐1 safety
- Cable Length 10 ft
- Cable Length Note Max: 100 ft
- Diameter 1.05 in
- Electrical Connection 3/4 in NPT male Conduit with Screw Terminal block
- Linear Flow Rate, Max 90 ft/s
- Linear Flow Rate, Min 1 ft/s
- Media Compatibility Gases
- Operating Pressure, Max 150 psi
- Operating Pressure Note Maximum Fluid Pressure: PP or PVDF: 150 psi @ 25°C (77°F) derated @ 1.667 psi per °C above 25°C (77°F)
- Operating Temperature, Max 60 °C
- Operating Temperature, Min -40 °C
- Power Consumption 70 mA
- Process Connection Size 3/4 in
- Process Connection Type NPT Male
- Process Temperature, Max 60 °C
- Process Temperature, Min 0 °C
- Response Time 10 sec
- Response Time Note 10 sec after initial 30 sec warm up
- Supply Power Note 12 to 36 Vdc @ 70 mA
- Supply Voltage 12 to 36 Vdc
- Switch Rating 1 A
- Switch Type SPST NO/NC, Selectable
- Thermal Effects 0.5%/°C
- Wire Gauge 22 AWG
OMEGAs FST-320 Series thermal dispersion flow switches, especially designed for use with gases, sense changes in the heat transfer characteristics of the gases. Flow velocities from 1 to 90 fps are effectively monitored. The flow switch incorporates a standard SPST Relay switch output for control flexibility. The OMEGA® LVCN-131 and LVCN-141 controllers can easily be interfaced to perform a variety of control functions. The FST-320 family of sensors can be easily installed in line sizes ranging from 3/4 to 12'.
PDFs & Manuals
