Netherlands 07077 03815 | Intl +31 (0) 7077 03815 | Welcome to our new site - found a bug? Please report it here
SA1-RTD-Series
Self-Adhesive Polyimide Fast Response RTD Surface Sensors, Class A Accuracy
Models In Stock
- Pt100 DIN Class A accuracy
- Easy installation with self-adhesive backing
- Ideal for flat or curved surfaces
- Temperature range: -73C to 260°C (-100°F to 500°F)
SA1-RTD-Series
From
€
108,08
Models In Stock
Can't find the right model?
Use our custom configurator to fine tune your product
Product Overview
- Accuracy Class A
- Accuracy Detail 100 Ω DIN Class A (± 0.06 Ω or ± 0.15°C at 0°C) Accuracy Standard
- Cable Material Nickel, Copper
- Insulation PFA
- Mounting Class DIN Platinum
- Nominal Resistance 100 Ω
- Process Temperature, Max 260 °C
- Process Temperature, Min -73 °C
- Response Time In Water Immersion : <0.9 sec ; On a Hot Plate: <2 sec
- Self Heating Effect 0.40 °C / mW
- Stability <0.2 °C
- Stability Note Stability: Less than 0.2°C drift/year
- Temperature Coefficient 0.00385 Ω/Ω/°C
- Temperature Coefficient Note α = 0.00385 Ω/Ω/°C
- Temperature Sensor Type RTD
- Wire Gauge 26 AWG
The Omega SA1-RTD Series is a high-performance RTD surface sensor designed for precision temperature monitoring on flat or curved surfaces. These self-adhesive, fast-response sensors deliver Class A accuracy, making them ideal for critical applications in electronics, HVAC, industrial process control, and laboratory testing.
Constructed with a 2x2x0.8mm thin-film platinum RTD element and supplied with PFA-insulated 3- or 4-wire configurations, each RTD surface sensor in the SA1-RTD lineup operates continuously from -73 °C to 260 °C, with short-term capability up to 290 °C when cemented in place. With response times under 1 second in water immersion and under 2 seconds on hot plates, these units capture temperature changes rapidly and accurately.
Among the standout features of this RTD surface sensor are its excellent long-term stability (drift less than 0.2 °C/year), and Class A accuracy at ±0.06Ω at 0°C. The self-adhesive backing allows for easy installation, while optional thermal epoxies such as OMEGABOND improve adhesion and thermal contact when permanent mounting is required.
Backed by the Omega commitment to quality, calibration support, and global technical service, the SA1-RTD Series offers engineers, OEMs, and technicians a dependable RTD surface sensor solution that combines precision, ease of installation, and durability under demanding conditions.
PDFs & Manuals
Accessories
accessories
SA1-RTD Surface-Mount RTD Temperature sensor | Quick Shipment
$190.81 / each
3 In Stock