Netherlands 07077 03815 | Intl +31 (0) 7077 03815 | Welcome to our new site - found a bug? Please report it here
PX3005-DIFF
Rangeable, Differential Pressure Transmitters with Display
- 0.075% Accuracy
- Linear or Square Root Output
- Adjustable Pulsation Dampening
- LCD Displays Either Process Variable, mA, or %
PX3005-DIFF
From
€
1.115,18
Product Overview
- Accuracy ± 0.075 %
- Accuracy Class < 0.1%
- Accuracy Detail Accuracy (NLHR, 20°C ± 5°C): ± 0.075TD% SPAN (Square root output accuracy is 1.5 times linear output accuracy)
- Additional Features 1 Rangable with 5 digit display
- Damping Time 0 to 100 sec
- Electrical Connection M12 4 pin
- Electrical Output 4 to 20 mA
- Electrical Output Note 4 to 20mA Two wire, linear or square root output selectable
- Enclosure Material 316L Stainless Steel
- Enclosure Ratings IP67
- Fill Fluid Silicon oil
- Loop Resistance, Max <(U-10.5)/0.021Ω, where U is supply voltage
- Materials, Wetted 316 Stainless Steel, FKM
- Media Compatibility Air, Alkaline solutions, Any, Argon, Carbon dioxide, Dilute Acids, Gases, Helium, Hydraulic Oil, Hydrogen, Light Oil, Liquids, Nitrogen, Non-corrosive Dry Gasses, Oil, Oxygen, Solvents, Steam, Water, Water-based fluids
- Operating Temperature, Max 70 °C
- Operating Temperature, Min -20 °C
- Output Signal Current
- Position Effect Install error less than 400Pa (1.60” H2O) can be corrected by PV = 0 reset
- Power Supply 500 mW
- Measurement Pressure Type Differential
- Process Connection Size 1/4 in
- Process Connection Type NPT Female
- Process Temperature, Max 120 °C
- Process Temperature, Min -40 °C
- Response Time 200 ms
- Stability ± 0.2%
- Stability Note ± 0.2% 60 months
- Storage Temperature, Max 85 °C
- Storage Temperature, Min -40 °C
- Supply Voltage 10.5 to 55 Vdc
- Thermal Effect on Zero error, Max ± (0.1 +0.1TD)% SPAN
- Transmission Distance up to 1000 meters
- Vibration Effect GB/T 1827.3/IEC61298-3 tests, 20g (5 to 2000 HZ, max <± 3 mm), <0.1% URL
- Weight 3 kg
The Omega differential PX3005-DIFF is a compact, rangeable, pressure transmitter ideal for monitoring pressures in process automation, hydraulic systems, compressors, pumps, and in tank level applications where consistent, reliable pressure measurement is essential. The PX3005-DIFF utilizes a unique encapsulation construction of a MEMs piezoresistive pressure sensor coupled to an advanced microprocessing to provide superior accuracy and performance.
The unique construction enables high line pressure operations and superior protection from pressure overloads. The rugged 316 stainless-steel enclosure is IP67 rated making it suitable for wash down environments. A 5-digit backlit LCD allows for a full precision representation of process variable. Available in ranges from 1 to 1,500 psi, the intelligent transmitter module allows for configuration of the 4 to 20 mA signal, display of input or output, and choice of 19 measurement units. The output signal can be adjusted to re-arrange the transmitter or “tare” unwanted fluid head preloads. Rangeability is capable of adjusting zero and span are from -100 to 100% FS URL (Upper Range Limit) with a minimum span of 30% URL. This means a 15 psi transducer can have the zero set between -15 to FS 15 psi. For example, zero could be set for -15 psi and maximum 15 psi so the output would be 4 mA at -15 psi, midpoint 12 mA would be 0 psi and 20 mA would be 15 psi.
The unique construction enables high line pressure operations and superior protection from pressure overloads. The rugged 316 stainless-steel enclosure is IP67 rated making it suitable for wash down environments. A 5-digit backlit LCD allows for a full precision representation of process variable. Available in ranges from 1 to 1,500 psi, the intelligent transmitter module allows for configuration of the 4 to 20 mA signal, display of input or output, and choice of 19 measurement units. The output signal can be adjusted to re-arrange the transmitter or “tare” unwanted fluid head preloads. Rangeability is capable of adjusting zero and span are from -100 to 100% FS URL (Upper Range Limit) with a minimum span of 30% URL. This means a 15 psi transducer can have the zero set between -15 to FS 15 psi. For example, zero could be set for -15 psi and maximum 15 psi so the output would be 4 mA at -15 psi, midpoint 12 mA would be 0 psi and 20 mA would be 15 psi.
PDFs & Manuals
