Netherlands 07077 03815 | International +31 (0) 7077 03815 | Welcome to our new website, found an issue or bug? Please report it here
KFH-2-Element90
Pre-Wired Strain Gauges for Easy Installation
Models In Stock
- Pre-Wired Gages Make Installations Easy!
- No Soldering at the Measuring Point
- Sold in Packs of Ten
- Each Gage has 50 mm of PTFE Cable before Transitioning to AWG 28 Leads to Prevent Leads from Adhering During Installation
KFH-2-Element90
From
€
282,32
Models In Stock
Product Overview
- Additional Features 1 Pre Wired
- Adhesive SG496, SG401, TT300
- Carrier Thickness 45 μm
- Connection Note PTFE wire, Ø - 0.051 mm², approximately 50 mm long, connected to AWG 28 ribbon cables (PVC insulated) through solder sleeves in 2- or 3-wire configurations
- Electrical Connection Wire Leads
- Elongation 20000 µm/m to 25000 µm/m
- Gauge Factor 2
- Grid Style Planar X-Y Pattern
- Grid Thickness 5 μm
- Material Expansion Compensation Steel
- Materials Constantan, Polyimide
- Operating Temperature, Max 155 °C
- Operating Temperature, Min -10 °C
- Pack Size 10
- Strain, Max 50,000 µm
- Temperature Compensation 16 x 10-6/K
- Temperature Compensation Note α for aluminium: 23 x 10-6 /K(12.8 x 10-6/°F) α for plastic material: 65 x 10-6/K (36.1 x 10-6/°F) α for austenitic steel: 16 x 10-6/K (8.9 x 10-6/°F) α for titanium: 9 x 10-6/K (5.0 x 10-6/°F) α for molybdenum: 15.4 x 10-6/K (3.0 x 10-6/°F) α for quartz: 0.05 x 10-6/K (0.3 x 10-6/°F)
The planar XY pattern (0 / 90°) allows precision strain measurement by eliminating the errors often associated with a stacked XY pattern. These gages are available with either two 1-meter leads or three 3-meter leads per grid and are compensated for steel.
PDFs & Manuals
