FMA5444

Economical Gas Mass Controllers With or Without Integral Display

Cliquez et maintenez pour zoomer

Choisissez une variante

Précision

± 1.5 % ± 1 %

Display Type

None LCD

Material Construction Option

Aluminum and Brass Body Stainless steel Body

Volumetric Flow Rate, Max

500 SLM 10 SCCM 20 SCCM 50 SCCM 100 SCCM 200 SCCM 500 SCCM 1 SLM 2 SLM 5 SLM 10 SLM 15 SLM 20 SLM 30 SLM 40 SLM 50 SLM 60 SLM 80 SLM 100 SLM 200 SLM 1000 SLM

Voir toutes les modèles Voir tous les accessoires

€ 2.355,34 / each

Article# FMA5444

Ajouté à votre panier

En stock

Délai de livraison (si pas en stock): 12 semaines

Ajouter à la liste des projets

Voir Les Spécifications

Spécifications du produit

<< Voir toutes les modèles de produits

Brand
Accuracy	± 1.5 %
Accuracy Detail	For units with full range less than 100 SLM ± 1% FS, including linearity over 15 to 25°C (59 to 77°F) and 0.7 to 4.2 kg/cm² (10 to 60 psia). For units ≥ 100 SLM Full Range: ± 1.5% FS, including linearity over 15 to 25°C (59 to 77°F) and 0.7 to 4.2 kg/cm² (10 to 60 psia) from 20 to 100% of range; ± 3% FS from 0 to 20% of range
Altitude Sensitivity	Horizontal flow path, no shift in calibration up to +20 degree pitch
Calibration	NIST Certificate
Control Valve	Solenoid Valve
Display Type	None
Electrical Output	4 to 20 mA, 0 to 5 Vdc
Enclosure Ratings	Inst. Level II/Poll. Degree II (IEC 60664)
GrossWeightValue	0.15
Humidity Range	0 to 70% RH
Leak Rate Under Vacuum	less than 10^⁻⁷ cc He/s
Material Construction Option	Aluminum and Brass Body
Materials, Wetted	316 Stainless Steel, Anodized Aluminum, Brass, FKM
Media Compatibility	Clean dry air / inert gas, HVAC / room air, Inert / non-reactive gases, Oxygen
Operating Pressure Note	35 kg/cm² gage (500 psig); 70 kg/cm2 gage (1000 psig) for ranges up to 100 SLPM. 1.76 kg/cm (25 psig) optimum
Operating Pressure, Max	500 psi
Operating Pressure, Min	0 psi
Operating Temperature, Max	50 °C
Operating Temperature, Min	5 °C
Output Detail	Linear 0 to 5 Vdc: 1000 V minimum load 4 to 20 mA: 50 to 500 V loop resistance, ± 20 mV max noise
Output Signal	Current, Voltage
Pressure Coefficient	0.01% FS/psi
Pressure Drop, Max	50 psi
Process Connection Size	1/2 in
Process Connection Type	Compression Fitting
Précision	± 1.5 %
Repeatability	± 0.5%
Response Time	5 sec
Response Time Note	5 seconds to within ± 2% of set flow rate over 25 to 100% FS
Series ID	FMA5000A-Series
Supply Current	Up to 800 mA
Supply Voltage	12 to 15 Vdc
Temperature Coefficient	0.15% FS/°C
Turndown Ratio	40:1
Volumetric Flow Rate, Max	500 SLM
Volumetric Flow Rate, Min	0.25 SCCM, 12.5 SLM
Pays d'origine	United States
Voir toutes Spécs Montrer moins