Netherlands 07077 03815 | Intl +31 (0) 7077 03815 | Welcome to our new website, found an issue or bug? Please report it here
DRSL-TC-ISO
Choose a Variant
Input Type
Added to Your Shopping Basket
Configuration complete.
Please add to basket to keep it or exit the configuration
Please add to basket to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy | ± 0.05 % |
| Accuracy Detail | CJC Accuracy: ±0.15°C |
| Additional Features 1 | Isolated |
| Approvals | CE, UL, RoHS |
| Calibration Temperature, Max | 28 °C |
| Calibration Temperature, Min | 20 °C |
| EMC Immunity Note | NAMUR NE 21, A Criterion, Burst: <±1% of span (span = selected input range) |
| EMC Standard | NAMUR NE 21 |
| Electrical Output | 4 to 20 mA |
| Enclosure Ratings | IP20 |
| GrossWeightValue | 0.24 |
| Height | 113 mm |
| Input Range Note | Sensor and Cable Specifications:5 kΩ per wire;Cold Junction Compensation (CJC): Internal or external (selectable);CJC Accuracy via External CJC ;(Pt100 RTD Sensor): Better than ±0.15°C (DRSL-TC-ISO only);CJC via Internally Mounted Sensor:Better than ±2.5°C;Open Thermocouple Detection:Yes (DIP switch selectable upscaleor downscale) |
| Input Type | Isolated thermocouple |
| Installation | Pollution degree 2 and measurement/overvoltage category II |
| LED Indicators | Green LED indicates operational status of the unit and input sensor |
| Length | 115 mm |
| Load Resistance | Voltage Output :>10 kΩ min,;Current Output: 21 mA/600 Ω /12.6V max |
| Mounting | DIN Rail 35 mm Standard, EN 60715 |
| Number of Inputs | 1 |
| Operating Temperature, Max | 70 °C |
| Operating Temperature, Min | -25 °C |
| Output Detail | Current Output Programmable Signal Ranges:0 to 20 and 4 to 20 mA Range Limits (NAMUR NE43 Out of Range): Below 3.8 mA or above 20.5 mA for 4 to 20 mA output; 0 mA or above 20.5 mA for 0 to 20 mA output Sensor Error Detection (Dip Switch Selectable for Enable or None):Below 3.5 mA or above 23 mA for4 to 20 mA output; 0 mA or above23 mA for 0 to 20 mA output Incorrect DIP-Switch Setting Identification: 0 mA Output Error Level: DIP switch selectable for upscale or downscale Voltage Output Programmable Signal Ranges:0 to 10V, 2 to 10V, 0 to 5V and 1 to 5V Range Limits (Out of Range):Range ±2.5% Incorrect DIP Switch Setting Identification: 0V |
| Output Signal | Current, Voltage |
| Output Value | Process |
| Power Consumption | 0.7 W, Internal - 0.65 W |
| Relative Humidity | 0 to 95% RH (non-condensing) |
| Response Time | < 30 ms |
| Response Time Note | Response Time (0 to 90%, 100 to 10%): <30 ms/300 ms (selectable, provides either fast response or signal dampening as needed) |
| Screw Terminal Torque | 0.5 Nm |
| Series ID | DRSL-TC-Srs-Sig-Cond |
| Stability | Load Stability: ≤0.01% of span/100 Ω |
| Storage Temperature, Max | 85 °C |
| Storage Temperature, Min | -40 °C |
| Supply Power Note | 16.8 to 31.2 Vdc via power rail or connectors |
| Supply Power Type | DC |
| Supply Voltage | 16.8 to 31.2 Vdc |
| Temperature Coefficient | <±0.01% of span/°C |
| Temperature Measurement Range | J: 100 to 1200°C, K: 180 to 1372°C |
| Voltage Output Range | 0 to 10 Vdc |
| Weight | 70 g |
| Width | 6.1 mm |
| Wire Gauge | 26 to 12 AWG |
| Country of Origin | Denmark |
| See All Specs | |
PDFs & Manuals
