Skip to search Skip to main content Skip to navigation

DRSL-RTD-ISO

RTD Input DIN Rail Signal Conditioners

Click and hold to zoom

Choose a Variant

Accuracy

± 0.05 % ± 0.1 %

See all Models See all accessories

€ 211,00 / each

Item# DRSL-RTD-ISO

Added to Your Shopping Basket

In Stock

Lead Time (If not in stock): 7 Days

+ Add to Project List

See Specs

Product Specs

<< See all Product Models

Brand
Accuracy	± 0.05 %
Accuracy Detail	Better than 0.2°C or ±0.1% of selected range
Approvals	CE, UL, RoHS
Calibration Temperature, Max	28 °C
Calibration Temperature, Min	20 °C
EMC Immunity Note	NAMUR NE 21, A Criterion, Burst: <±1% of span (span = selected input range)
EMC Standard	NAMUR NE 21
Electrical Output	4 to 20 mA
Enclosure Ratings	IP20
GrossWeightValue	0.25
Height	113 mm
Input Range Note	Sensor Current, RTD: <150 µA;Sensor Cable Specifications: 50 Ωper wire or 50 nF;Effect of Sensor Cable Resistance (3 or 4-wire RTD): <0.002 Ω/Ω;Broken Sensor Detection: >800 Ω;Shorted Sensor Detection: <18 Ω
Input Type	RTD
Installation	Pollution degree 2 and measurement/overvoltage category II
LED Indicators	Green LED indicates operational status of the unit and input sensor
Length	115 mm
Load Resistance	Current: 21 mA/600Ω /12.6V max;Voltage:>10 kΩ min
Mounting	DIN Rail 35 mm Standard, EN 60715
Noise Calibration	>60 dB
Number of Inputs	1
Operating Temperature, Max	70 °C
Operating Temperature, Min	-25 °C
Output Detail	Current: Range Limits(NAMUR NE43 Out of Range):Below 3.8 mA or above 20.5 mA for 4 to 20 mA output; 0 mA or above 20.5 mA for 0 to 20 mA output Sensor Error Detection(Dip Switch Selectable for Enable or None): Below 3.5 mA or above 23 mA for 4 to 20 mA output; 0 mA or above 23 mA for 0 to 20 mA output Incorrect DIP-Switch Setting Identification: Below 3.5 mA or above 23 mA for 4 to 20 mA output; 0 mA or above 23 mA for 0 to 20 mA output Output Error Level: DIP switch selectable for upscale or downscale. Voltage: Range Limits (Out of Range):Range ±2.5% Sensor Error Detection (Dip Switch Selectable for Enableor None): 0V or selected range + 10% Incorrect DIP-Switch Setting Identification: 0V Output Error Level: DIP switch selectable for upscale or downscale
Output Signal	Current, Voltage
Output Value	Process
Power Consumption	0.7 W, Internal - 0.65 W
Relative Humidity	0 to 95% RH (non-condensing)
Response Time	< 30 ms
Response Time Note	Response Time (0 to 90%, 100 to 10%): <30 ms/300 ms (selectable, provides either fast response or signal dampening as needed)
Screw Terminal Torque	0.5 Nm
Series ID	DRSL-RTD-Srs-Sig-Cond
Stability	Load Stability: ≤0.01% of span/100 Ω
Storage Temperature, Max	85 °C
Storage Temperature, Min	-40 °C
Supply Power Note	16.8 to 31.2 Vdc via power rail or connectors
Supply Power Type	DC
Supply Voltage	16.8 to 31.2 Vdc
Temperature Coefficient	≤±0.02°C/°C
Voltage Output Range	0 to 10 Vdc
Weight	70 g
Width	6.1 mm
Wire Gauge	26 to 13 AWG
Country of Origin	Denmark
See All Specs Show Less