Netherlands 07077 03815 | Intl +31 (0) 7077 03815 | Welcome to our new website, found an issue or bug? Please report it here
DRSL-LPI-2
Added to Your Shopping Basket
Configuration complete.
Please add to basket to keep it or exit the configuration
Please add to basket to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy | ±10 µA + 0.05 % |
| Approvals | CE, UL, RoHS |
| Bandwidth | 100 Hz |
| Calibration Temperature, Max | 28 °C |
| Calibration Temperature, Min | 20 °C |
| Conversion Rate | 1:1 |
| Current Measurement Range | 0 to 20.5 mA |
| EMC Immunity Note | Extended EMC Immunity NAMUR NE 21, A Criterion, Burst: <±1% of span |
| EMC Standard | NAMUR NE 21 |
| Electrical Output | 0 to 20 mA |
| Enclosure Ratings | IP20 |
| GrossWeightValue | 0.26 |
| Height | 113 mm |
| Input Range Note | Current; Signal Conversion: 1 to 1; Functional Range: 0 to 23 mA (NAMUR NE43 compliant); Start up Current: 10 µA typical; Input Overload: 50 mA max; Input to Output Voltage Drop:1.25V + (0.015 x Vout)where Vout = Iout x Routput, typical; Input Voltage Drop:(Unit voltage drop) + Vout |
| Input Type | Current |
| Installation | Pollution degree 2 and measurement/overvoltage category II |
| Isolation | Isolation Voltage (Test): 2.5 kVac ;Isolation Voltage (Working):300 Vac |
| Length | 115 mm |
| Mounting | DIN Rail 35 mm Standard, EN 60715 |
| Noise Calibration | >60 dB |
| Number of Inputs | 2 |
| Operating Temperature, Max | 70 °C |
| Operating Temperature, Min | -25 °C |
| Output Detail | Output Load: 600Ω max Output Load Stability: <0.01% of span/100 Ω (span = 0 to 20 mA) Voltage Limit: 17.5V |
| Output Signal | Current |
| Output Value | Process |
| Power Consumption | 30 mW |
| Relative Humidity | 0 to 95% RH (non-condensing) |
| Response Time | < 5 ms |
| Response Time Note | Response Time (0 to 90%, 100 to 10%): <5 ms |
| Screw Terminal Torque | 0.5 Nm |
| Series ID | DRSL-LPI-Srs-Loop-Pwr-Iso |
| Spec Sheet QR URL | https://www.dwyeromega.com/en-us/din-rail-input-loop-powered-isolators-w-1-or-2-channel-models/DRSL-LPI-Srs-Loop-Pwr-Iso/p/DRSL-LPI-2?guid=701a700000ulrduaaq&utm_source=spec-sheet&utm_medium=qr-code&utm_campaign=prd-sku-spec-sheet&utm_content=auto-generated-sku-level-spec-sheet |
| Stability | Load Stability: ≤0.01% of span/100 Ω |
| Storage Temperature, Max | 85 °C |
| Storage Temperature, Min | -40 °C |
| Supply Power Type | Loop Powered |
| Temperature Coefficient | ≤±2 µA/°C |
| Voltage Loss | (Unit voltage drop) + Vout |
| Weight | 70 g |
| Width | 6.1 mm |
| Wire Gauge | 26 to 12 AWG |
| Country of Origin | Denmark |
| See All Specs | |
PDFs & Manuals
