Skip to search Skip to main content Skip to navigation

Netherlands 07077 03815 | Intl +31 (0) 7077 03815 | Welcome to our new website, found an issue or bug? Please report it here

We noticed you are in , please visit your local site by clicking the below link for regional offers and support.
Back To Top

Control Enclosures

32 Products
Pre-Cut Panel, DIN Meter/Controller, NEMA 4X Fiberglass Enclosure

These front panels are 2 mm (0.090') thick aluminum and are pre-cut for up to three DIN size controllers, depending on the size of the enclosure.

Polycarbonate Electrical Enclosures with Solid or Clear Covers

AMP Series polycarbonate enclosures designed to insulate & protect electrical controls and components in both indoor and outdoor applications.

NEMA Type 4x Stainless Steel 30mm & 22 mm Pushbutton Enclosures

Designed to offer protection for all standard brands of oil-tight pushbuttons, switches, and pilot lights where slanted surfaces are desired.

NEMA 12 Steel Pushbutton Enclosures for 22 & 30.5 mm Push Buttons

Designed to offer protection for oil-tight pushbuttons, switches, and pilot lights from dust, water, dirt and oil.

NEMA Type 3R Electrical Outdoor Enclosures

The SCE-RLP Series electrical enclosures are designed to house electrical controls, instruments and equipment in an outdoor, weatherproof environment.

Vent Plug

Pressure differentials in enclosures with a high degree of protection with respect to humidity and dust are a result of inside and outside temperature fluctuations.

Enclosure Hole Plugs for Fiberglass & Steel Electrical Enclosures

AMHS Series hole plugs are used in plugging existing unwanted holes in electrical enclosures for standard hole sizes for pilot lights, push buttons and conduit fittings.

NEMA 4X (IP66) Fiberglass Enclosures, Large Wall Mount Cabinets

OM-AM Control Series fiberglass electrical enclosures designed to insulate & protect electrical controls & comp. both indoors/outdoors @ high. temp./corrosive envir.

NEMA 4X 304SS Slope Top Washdown Enclosure, Chemical Resistant

SCE-2DST Series 304SS electrical enclosure & control panel, designed to house electrical & electronic controls, instruments, equipment in areas which are regularly hosed down

NEMA 4X Enclosures for DIN Rail Mount IEC Components

The EK Series polycarbonate enclosures are a unique design to house and protect standard IEC components

Non-Metallic Fiberglass NEMA 4X Free Standing Enclosures,

OM-AM FS Series non-metallic fiberglass electrical cabinets designed to insulate, protect electrical, electronic controls, instruments, components in both indoor/outdoor

Control Enclosures

Control Enclosures support automation, monitoring, switching, indication, safety, motion, or process control tasks in industrial, HVAC, laboratory, facility, and OEM systems. Products span control enclosures, instrument enclosures, panel boxes, protective housings, field enclosures, and enclosure accessories for controllers, switches, meters, and wiring.

Applications include outdoor instruments, process panels, HVAC controls, field transmitters, data loggers, switches, relays, and OEM equipment. Products represented in the source data include Omega Engineering and Dwyer Instruments.

Applications include:

  • Protect power, signals, enclosures, and hazardous-area interfaces
  • Use transformers, barriers, control enclosures, and safety devices
  • Support panels, field instruments, wireless systems, and automation equipment
  • Separate circuits, house controls, or adapt power requirements
  • Match safety function to the installation environment
Searching for your items
en-NL
en_NL
Save Configuration
-->