Series-CSE-N1

Supported Applications

The Dwyer Series CSE-N1 and CSE-KN Carbon Steel Enclosures are spot-welded, wall-mounted units designed for general-purpose areas. These enclosures house electrical controls, instruments, and components in environments requiring basic protection.

• Housing of electrical controls
• Mounting of instrumentation panels
• Protection of internal components in general-purpose settings

Operating Conditions & Performance

The series is constructed from carbon steel and carries an NEMA 1 enclosure rating. The enclosures are certified by CSA and cULus, and they meet the technical requirements of EU Directive 2011/65/EU (RoHS II). No specific operating temperature ranges or process limits are defined in the source documentation for this series.

Construction & Ratings

• Housing Material: Carbon steel
• Enclosure Rating: NEMA 1
• Certifications: CSA, cULus
• Compliance: Meets the technical requirements of EU Directive 2011/65/EU (RoHS II)

Dimensions & Weight Envelope

The series offers a range of sizes defined by height, width, and depth. Available dimensions span from compact units such as CSE-N1-100804 at 10 in (25) x 8 in (20) x 4 in (10), weighing 7 lb (3.2), to larger configurations like the CSE-N1-303008 measuring 30 in (76) x 30 in (76) x 8 in (20) and weighing 60 lb (27.2). The Series CSE-KN models include sizes such as CSE-KN-181606 at 18 in (46) x 16 in (41) x 6 in (15), weighing 22 lb (10).

Sub-Panels

The series supports optional sub-panels available as solid steel or perforated steel. The model notation distinguishes these types: "1S" denotes a solid steel panel, while "1P" denotes a perforated steel panel.

Configuration Options

Selectable configurations include enclosure dimensions and the inclusion of knockouts for cord entry in specific series variants. The model number guide follows the format CSE-N1--- or CSE-KN---.

• Housing: Carbon steel, spot-welded construction
• Mounting Style: Wall-mounted with 180° door swing and quarter-turn latch
• Cord Entry: Series CSE-KN includes knockouts to allow cords to pass easily into the unit; Series CSE-N1 does not list this feature.

Accessories & Options

The following options are available for configuration:

• A-CSE-L: Keylocking wing knob door latch, includes 1 lock and 2 keys
• A-CSE-K: Replacement keys, includes 2 keys

Mounting Straps

Separate mounting straps are available in various widths to support the enclosure weight. Models include A-CSE-1M-08 through A-CSE-1M-24, with weights ranging from 1 lb (0.5) to 3 lb (1.4).

Key Product Differences

The primary distinction between the two series lies in cord entry features and available dimensions.

• Series CSE-N1: Standard wall-mounted carbon steel enclosures without knockouts for cords. Available in a wide range of heights, widths, and depths (e.g., 4 to 8 inches deep).
• Series CSE-KN: Includes knockouts to allow cords to pass easily into the unit. Documented models include sizes such as CSE-KN-181606, CSE-KN-242006, and CSE-KN-362406.

The series documentation notes that for additional sizes beyond those listed in the model chart, customers should contact the factory. Sub-panel options are differentiated by material type: solid steel (1S) or perforated steel (1P).