1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
OMB-DAQ55-Series
USB Powered Acquisition Modules for Thermocouples Process Signals
- The OMB-DAQ55-Series has been discontinued. Please click see OMB-DAQ-2416-Series for a potential replacement.
- Ultra Low-Power Design Requires No External Power or Batteries
- Can be Located Up to 5 Meters (16.4') from the PC
- High-Resolution, 22-Bit A/D Converter
OMB-DAQ55-Series
From
C$
1 280.00
Product Overview
- Accuracy ± 0.5 °C
- Bandwidth DC to 1 MHz
- Configuration Parameters Open-Collector Driver, Schmitt-Trigger Input, User-Configurable Input/Output
- Data Interface Ethernet
- Digital Input Digital: Low <1.3 Vdc
- Height 45 mm
- Input Configuration Connected Software
- Input Resistance >10 MΩ (SE), >20 MΩ (DE)
- Isolation 500V from PC
- Length 182 mm
- Operating Temperature, Max 50 °C
- Operating Temperature, Min 0 °C
- Output Resistance 10 Ω
- Pull-up Resistor 27 KΩ to 5V for Switch or Relay Sensing
- Relative Humidity 0 to 95% RH non-condensing
- Sampling Rate 80 Hz (80 updates/second)
- Supply Power Type DC/USB
- Supply Voltage 6 to 16 Vdc
- Voltage Measurement Range ±20V, -10 to 20V, ±10V, ±5V, ±4V, ±2.5V, ±2V, ±1.25V, ±1V, ±625 mV, ±500 mV, ±312 mV, ±250 mV , ±156 mV , ±125 mV, ±62 mV, ±31 mV, Differential, Single ended
- Width 92 mm
* The OMB-DAQ-54 does not have frequency, digital I/O or expansion capabilty.
The OMB-DAQ-54, OMB-DAQ-55 and OMB-DAQ-56 Personal Daqs are full-featured data acquisition products that utilize the Universal Serial Bus (USB), which is built into almost every new PC. Designed for high accuracy and resolution, the 22-bit OMB-DAQ-54/55/56 data acquisition systems directly measure multiple channels of voltage, thermocouple, pulse, frequency, and digital I/O (the OMB-DAQ-54 does not have digital, frequency I/O). A single cable to the PC provides high-speed communication and power to the OMB-DAQ-54/55/56. No additional batteries or power supplies are required, except when using bus-powered hubs.
The OMB-DAQ-54/55/56 modules are the first products in a new family of low-cost, USB-based products from OMEGA. Because of the strict power limitations of the USB, the modules incorporate special power management circuitry to ensure adherence to USB specs.
The OMB-DAQ-54/55/56 avoid many of the limitations of PC-Card (PCMCIA) data acquisition devices and offer advantages over many PC plug-in data acquisition boards as well. The OMB-DAQ-56 offers twice the I/O capacity as the OMB-DAQ-55 in the same size package. To simplify attachment of signals and transducers, the OMB-DAQ-54/55/56 modules feature convenient, removable screw-terminal input connections.
SOFTWARE
Personal DaqViewTM a graphical data acquisition software, is an easy-to-use yet powerful application is provided with the OMB-DAQ-54, OMB-DAQ-55 and OMB-DAQ-56 at no additional charge. The software allows users to configure a test, and display or record data within minutes, without programming.
Real-Time Displays
Personal DaqView allows the creation of real-time displays using built-in display options, including digital, dial meter, bar graph, and strip chart displays. No programming is required — simply point, click, and drag desired display options to create a visual display screen.
The OMB-DAQ-54/55/56 are also shipped with PostView, a postacquisition application that permits you to display acquired data previously saved to a file. Drivers for Visual Basic, Delphi and C++ for Windows XP SP2 and SP3/Vista/7 are also included. In addition, drivers are available for icon-based software packages, such as DASYLab and LabVIEW.
Personal DaqView PlusTM
The optional Personal DaqView Plus software provides advanced charting capabilities, including multiple traces per chart, multiple chart groups, and support for up to 100 Personal Daq devices attached to one PC.
Personal DaqViewXLTM
The optional Personal DaqViewXL software allows Personal DaqView or Personal DaqViewXL Plus to execute seamlessly from within Microsoft® Excel’s tool palette. Acquired measurements are inserted directly into an Excel spreadsheet in real time.
Personal DaqViewXL PlusTM
The optional Personal DaqViewXL Plus combines the features of Personal DaqView Plus and Personal DaqViewXL into one package.
PDFs & Manuals
Software & Drivers
Accessories
accessories
cables
Spare USB cable, 1 m (3.2 ft)
C$55.00
0 In Stock
signal conditioners
USB Data Acquisition Modules for Thermocouples Process Signals
C$1 200.00
0 In Stock
Show Ratings & Reviews
Rated 5 out of
5
by
emil from
ULTIMATE FOR RELIABILITY AND ACCURACY !!!
RECOMMENDED FOR THERMOCOUPLE AND LOAD CELL MONITORING
Date published: 2017-12-24
I need software for the OMB-DAQ 54. I can't download it from you website.
Thank you for your question. We will require more information to help on this question, please email the DAS team at DAS@OMEGA.COM”
Date published: 2021-12-08
I have a data acquisition system (Omega OMB-DAQ-56) since this item is no longer available to purchase the required software is not available either. Would you be able to send me a software for that?
Thank you for your question. We will require more information to help on this question, please email the DAS team at DAS@OMEGA.COM
Date published: 2021-07-29
Is support for Windows 10 planned for the drivers? I am unable to get this device to work for windows 10
This is a older unit is is only supported by Windows 74 64 bit and older operating systems
Date published: 2020-12-08
We have brand new module. When T-type thermcouples were pluged in and program was set, it shows higher temeperature than it is. Is it possible that module is not calibrated properly? Mesurment condtions and thermcouples (certified) are like in manual.
Thank you for your question. Please direct the issues you are having to our Data Acquisition Engr dept-DAS@OMEGA.COM.
Date published: 2021-01-25
What part number or specifications do you have for the required terminal block connectors this DAQ uses. We have a OMB-DAQ-56 at work and someone lost the green phoenix connectors and I'm having a terrible time replacing it.
Hello, thank you for your question. The part number for the replacement input terminal block is OMB-CN-153-12.
Date published: 2020-04-22
Hello. What is the packaging dimensions for OMB-DAQ-54? We plan to include this as part of a kit, and need to know the size of the box.
Hello
I'm sorry we do not have the dimensions of the box, though for the unit itself it is 92 W x 182 L x 45 mm H
(3.6 x 7.1 x 1.6")
Date published: 2019-11-10