Need assistance? Call us: 1-800-663-4209
SEEX-Extention-Cables
Stainless Steel Armoured Thermocouple Extension Cable Assemblies
Models In Stock
SEEX-Extention-Cables
From
C$
59.00
Models In Stock
Product Overview
- Cable Diameter 0.275 in
- Cable Material Stainless Steel
- Color Code Standard ANSI
- Electrical Connection N/A
- Insulation Stainless Flexible Cable
- Number of Connectors N/A
- Number of Wires 2
- Process Temperature, Min 0 °C
- Series ID SEEX Extention Cables
Supported Applications
The Omega SEEX Extension Cable series consists of stainless steel armored thermocouple extension cable assemblies. These cables are designed to extend the signal from a thermocouple sensor to instrumentation or control systems, maintaining electrical continuity and providing mechanical protection for the conductors.
Operating Conditions & Performance
The SEEX series is constructed with stranded nickel-plated copper wire encased in an armored jacket. The available variants correspond to standard thermocouple types identified by their model prefixes: Type E, Type J, Type K, Type S, and Type T.
Thermocouple Types
- Type E (SEEX-E)
- Type J (SEEX-J)
- Type K (SEEX-K)
- Type S (SEEX-S)
- Type T (SEEX-T)
Configuration Options
The series offers configurable lengths and termination options to accommodate specific installation requirements. Model numbers encode the thermocouple type, cable length in inches, and connector style.
Cable Lengths
- Available lengths include 48", 60", 72", 96", 120", 144", 180", 240", and 300".
- Custom or non-standard lengths are indicated by specific numeric segments in the model number (e.g., SEEX-K-25, SEEX-J-71).
Termination Options
The final digit of the part number designates the termination style:
- -1: Spade lugs (e.g., SEEX-E-240-3-1, SEEX-J-48-1-1)
- -2: OTP connector or similar mating interface (e.g., SEEX-K-60-2-3)
- -3: Alternative termination configuration as defined by the specific model code structure.
Key Product Differences
Variants within the SEEX series are distinguished primarily by their thermocouple type and physical length. The armored construction provides a consistent mechanical profile across all types, while the internal wire composition varies to match the Seebeck coefficients of Type E, J, K, S, or T sensors.
PDFs & Manuals
Show Ratings & Reviews
Rated 5 out of
5
by
John F72 from
Very happy
This part is exactly what we needed. It arrived sooner than we had expected
Date published: 2025-06-16
Rated 5 out of
5
by
Michael of Dow Louisville from
Very Happy!
Great and timely service. Delivered in a timely manner as well.
Date published: 2025-04-21
Rated 5 out of
5
by
John F72 from
Good quality thermocouples
These thermocouples were exactly what we needed to finish our project.
Date published: 2024-09-19
What is the pressure rating of these probes?
Omega does not put a pressure rating on these probes and on most probes for that matter. The probe wall thickness is 0.025" and customers have done their own pressure estimates using this information.
Date published: 2022-06-29