Need assistance? Call us: 1-800-663-4209
SP-001-2-Series
Smart IR Sensor -70 °C to 380 °C Temperature
This item has been discontinued. We are retiring the Omega Link product line and transitioning to SensoScientific — the industry’s most advanced wireless monitoring platform, now a key part of our unified DwyerOmega portfolio.
SP-001-2-Series
From
C$
345.27
Product Overview
- Accuracy ± 4 °C (± 7.2 °F)
- Accuracy Detail Temperature Accuracy @ Ambient of 0 to 50°C(32 to 122°F): 1°C (1.8°F) or 1% of reading, whichever is greater Accuracy Over Entire Ambient Operating Range: 4°C (7.2°F) or 3% of reading, whichever is greater
- Approvals CE, UKCA
- Configuration Configurable via SYNC configuration software
- Diameter 12 mm
- Emissivity, Max 0.01 to 1.00
- Enclosure Material Stainless Steel
- Enclosure Ratings IP67, NEMA Type 6
- Length 67 mm
- Measurement Type Temperature
- Number of Channels 2
- Operating Temperature, Max 85 °C
- Operating Temperature, Min -40 °C
- Process Connection Type Internal
- Process Temperature, Max 380 °C
- Process Temperature, Min -70 °C
- Relative Humidity 0 to 95% RH
- Repeatability Temperature: 1°C
- Repeatability Note Temperature: 1°C (1.8°F) or 1% of reading
- Series ID SP-001-2-Series
- Software Compatible with OEG and SYNC configuration software
- Spectral Response, Max 14 µm
- Spectral Response, Min 5.5 µm
- Supply Power Type DC
- Supply Voltage 3.3 Vdc
- Temperature Response Time 1 sec
- Thread Diameter 12 mm
- Thread Length 33.5 mm
- Vibration 10 Gs from 10 Hz to 500 Hz
- Weight 35 g
Supported Applications
The Omega SP-001/SP-002 Smart IR Sensor is an ultra-miniature, non-contact infrared temperature probe for surface measurement from -70 to 380°C (-94 to 716°F). As part of the Omega Link ecosystem, it targets non-contact monitoring of moving, hard-to-reach, or otherwise inaccessible surfaces in data-acquisition, IIoT, and wireless sensing deployments.
It measures infrared surface temperature across a wide range of materials, including paper, thick plastics, rubber, food and organic materials, painted metals, and dusty, rusty, or oily surfaces.
Operating Conditions & Performance
The sensor reads infrared surface temperature from -70 to 380°C (-94 to 716°F) with a 1 second response time. Accuracy is 1°C (1.8°F) or 1% of reading, whichever is greater, over a 0 to 50°C ambient, and 4°C (7.2°F) or 3% of reading across the entire ambient range; repeatability is 1°C (1.8°F) or 1% of reading.
- Power: 3.3 VDC, 0.05 W maximum.
- Digital interface: I2C (SCL/SDA), two discrete I/O signals (DIO 0, DIO 1), and an interrupt (INTR), through a modular M12 8-pin male connector.
- Ambient range: -40 to 85°C (-40 to 185°F); humidity less than 95% RH, non-condensing.
- Enclosure and durability: stainless steel housing rated NEMA 6 / IP67, with vibration tolerance of 10 Gs from 10 Hz to 500 Hz.
The probe measures 12 mm in diameter and 67 mm in length, and weighs 35 g (1.2 oz). The series carries CE and UKCA approvals.
Configuration Options
Model configuration follows SP-00x-<Discrete I/O Pins>, where the base number sets the field of view (FOV) and the suffix sets the discrete I/O pin configuration:
- SP-001 vs SP-002: differ by field of view.
- -0 vs -1 suffix: differ by discrete I/O pin configuration.
All variants share the same -70 to 380°C measurement range, stainless steel M12 form factor, and Omega Link smart-interface capability, and can act as an edge controller with autonomous decision-making when paired with an Omega Link wireless gateway.
Key Product Differences
The series is offered in four models:
- SP-001-0
- SP-001-1
- SP-002-0
- SP-002-1
Compatible accessories include M12 cordsets and splitters (for example DM12CAB-8-1, DM12CAB-8-3, and DM12CAB-8-5, and the M12.8-T-SPLIT) and the SP-001-MB mounting bracket.
PDFs & Manuals
Software & Drivers
Accessories
cables
Smart Probe M12 8 pin sheilded T Splitt
C$65.56 / each
0 In Stock
installation hardware
signal conditioners
Smart Probe Wireless interface 915 MHZ
C$548.98 / each
0 In Stock
Show Ratings & Reviews
Can this item be wired directly to a temperature controller, or only to a computer?
Thank you for your interest in our product
Thank you for your interest in our product
The SP-001-0 series cannot be wired directly to a temperature controller. Currently it can only be used with the IF-001-0 USB cable and the XW-ED and XW-ED-Pro wireless transmitters.
If you want to connect directly to a Temperature controller you may want to consider the OS136A and OS137A series which can be offered for example in a 4 to 20 mA or Type K output
please see the attached specs
https://assets.omega.com/pdf/test-and-measurement-equipment/temperature/sensors/infrared-sensors/OS137A.pdf
https://assets.omega.com/pdf/test-and-measurement-equipment/temperature/sensors/infrared-sensors/OS136A.pdf
Date published: 2020-01-30
Can you have more than one sensor connected to your PC?
Yes you can have more than one of these devices directly connected to your PC via USB, each one would need the IF-001 USB interface.
Date published: 2022-10-04
Is this compatible with LabView software?
Thank you for inquiry. The IF-001 converter can be used with our smart sensor to communicate with LabView through Modbus Protocol.
Date published: 2020-06-24
How to i effectively aim the device to a specific spot? is there a laser light that shines on a spot?
Thank you for your inquiry. The 6:1 Field of View Ratio. See page 6 of the manual.
Date published: 2020-06-04