Skip to search Skip to main content Skip to navigation

RDXL6SD-USB

Six Channel Handheld Temperature Data Logger and Built-In Rechargeable Battery

4.5

(4)

Click and hold to zoom

Choose a Variant

Accessory Type

N/A

See all Models See all accessories

C$1,067.90

Item# RDXL6SD-USB

Volume discounts available

Volume Discount Schedule

Quantity	Price each
1-4	C$1,067.90
5-9	C$1,014.51
10-24	C$993.15
25-49	C$950.43
50-99	C$929.07
100+	C$907.72

QTY

Added to Your Shopping Cart

24 In Stock

Lead Time (If not in stock): 9 weeks

+ Add to Project List

See Specs

Product Specs

<< See all Product Models

Brand
Accessory Type	N/A
Battery life	32 hr
Data Interface	USB
Display Measuring Units	°C, °F
Display Type	LCD
Display Type Note	72 mm (2.83") resistive touch TFT, 320 x 240 pixels, backlit
Form factor	Handheld/Wall Mount
Height	32 mm
Input Type	Thermocouple, RTD
Length	71 mm
Measurement Type	Temperature
Number of Measurements	6
Operating Temperature, Max	50 °C
Operating Temperature, Min	0 °C
Sampling Time	1 to 86,400 sec
Sampling Time Note	1 to 86,400 seconds (1 day)
Supply Power Type	Battery
Temperature Accuracy	± 0.1%
Temperature Resolution	0.1 °C
Temperature Resolution Note	0.1° for temperatures below 1000°C or °F, 1° for temperatures above 1000°C or °F
Temperature Sensor Type	RTD or Thermocouple
Temperature Sensor Type Note	TC, RTD
Weight	200 g
Weight Note	200 g (7 oz) without thermocouples
Width	136 mm
Wire Gauge	28 to 16 AWG
See All Specs Show Less

PDFs & Manuals

RDXL6SD-USB-Series_spec RDXL6SD-USB-Series View More

View Less

Software & Drivers

rdxl6sd_usb_series_rdxl_templog_fullinstaller_zip_zip View More

View Less

Compliance

View Less

current tab: Accessories
Reviews

Accessories

RDXL6-ELMAU

Spare 5 Vdc power adaptor for RDXL6SD-USB ONLY

$64.44

7 In Stock

QTY

Reviews

Show Ratings & Reviews

4.5

(4)

Rated 4 out of 5 by FrankM from Decent We bought a couple of these, they do a good job of logging data. The graph is not super usable at least in firmware version 1.01. When the temperature is set to Fahrenheit it the graph displays it as 32° lower than it actually is. The graph also really needs a zoom feature that can be either dynamic or user controlled. Right now you can change how many seconds per graph pixel but if you change it it erases everything already on the graph. You can kind of scroll through the graph but this is rather buggy. It would also be great if we could put it into a mode where it logs voltage and resistance directly. Looking at the literature I was under the impression that the RTD would only work for PT100 sensors but in the settings it can be configured for PR200 500 and 1000 as well which I wish I had realized before ordering my sensors. It logs directly onto an included full sized SD card as a CSV file which is well formatted for excel to understand along with timestamps. If you pull the SD card while logging and then re-insert it it will continue logging but will not fill in any data points from the time the card was out. It would be nice if the SD card had a cover over it to prevent you from accidentally popping the card out. The SD card cannot be read from USB, instead a USB serial bridge get's installed that has a few mod-bus instructions allowing you to poll the device for data (including the raw voltage and resistance values) you cannot access any logged values you can only get values in real time. If you plug in or unplug the power the unit continuities working without missing a beat (unlike the HH306A and it's ilk that irrevocably erases all data every time you look at the power connector even though it has a battery and can operate under battery) It comes with a kickstand that feels like it will break soon. I wish it had a tripod mount instead.

Date published: 2018-10-23

Rated 4 out of 5 by EL1070 from Works great for what it is This is a handy little tool for recording TC's in spots where you don't have any power, just make sure you have fresh batteries in it. Although it has 6 inputs you can only use TC's in 4 of them. You have to have a SD card reader to extract the data as you can't read the logged over a USB cord form the device. The csv file is great for importing into excel and graphing.

Date published: 2019-09-27

Rated 5 out of 5 by Bob APE from Good product Works well. Good and easy to use GUI. Data transfer from CSV to excel works well too.

Date published: 2024-12-30

Rated 5 out of 5 by CPL Systems from Compact Nice compact unit , easy to use , great bright display

Date published: 2024-09-06