1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
FMG470-Series
Battery or DC Powered Magmeter with Pulse & Optional 4 to 20 mA Output
Models In Stock
- Easy Setup
- Minimal Straight Pipe
- Mounted or Remote Rate and Total
- Tamper-Evident Seal
Product Overview
- Accuracy ± 1 %
- Approvals CE
- Battery Size and Type Li-ion, 7.2V
- Cable Length 20 ft
- Conductivity > 20 µS/cm
- Display Note 128 x 64 dot-matrix LCD
- Display Type LCD
- Empty Pipe Detection Hardware/software, conductivity-based
- Enclosure Ratings IP68, NEMA 6P
- Low Flow Cutoff 0.50 %
- Material Construction Option N/A
- Media Compatibility Conductive liquids, Corrosive chemicals / acids / bases, Saltwater / brines
- Number of Digits 8
- Number of Outputs 1
- Operating Pressure, Max 150 psi
- Operating Temperature, Max 60 °C
- Operating Temperature, Min -12 °C
- Output Detail Current Sinking pulse
- Process Connection Type ANSI Flange
- Pulse Rate Note User-scalable from 0.1 to 99,999.9 volume units/pulse. Pulse width is one-half of pulse period with minimum pulse width of 2.5 ms, 200 pulses/sec max. For battery option meters, pulse width varies with frequency, 150 pulses/sec max
- Series ID FMG470-Series
- Storage Temperature, Max 70 °C
- Storage Temperature, Min -40 °C
- Velocity, Max 10 m/s
The FMG470 Series is the most economical flanged electromagnetic flowmeter on the market. With electrodes designed to discourage fouling, it is available in 3” to 12” pipe in municipal or industrial water, waste and reclaimed water, pump stations, and packaged plant applications. Minimal straight pipe requirements allow iMAG-Series meters to be used in piping configurations where there is little space between the meter and an elbow.
FMG470 Series meters are CE certified, certified to NSF/ANSI standard 61 and are rated IP68 for applications where the meter may be operated under water to a depth of at least 10 feet (3 meters) continuously.
The display is meter mounted, and both rate and total indication are standard. Rate and total units and pulse scaling can be set via the front panel touch key pad by the user. Bidirectional flow reading is standard with totals available in forward, reverse, net flow, batch forward flow, and batch reverse flow. Batch totals can be reset.
FMG470 Series meters are CE certified, certified to NSF/ANSI standard 61 and are rated IP68 for applications where the meter may be operated under water to a depth of at least 10 feet (3 meters) continuously.
The display is meter mounted, and both rate and total indication are standard. Rate and total units and pulse scaling can be set via the front panel touch key pad by the user. Bidirectional flow reading is standard with totals available in forward, reverse, net flow, batch forward flow, and batch reverse flow. Batch totals can be reset.
PDFs & Manuals
Accessories
cables
15M (50ft) DC Power/Output Cable, 8 Pin Connector For Pulse & 4-20 mA Output Models
C$376.99 / each
0 In Stock
consumables
installation hardware
Show Ratings & Reviews