1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
PUR-IS-2W
Pura Hazardous Area Transmitter
- Measures down to -120 °Cdp (-184 °Fdp) (1ppbV)
- Stable and repeatable measurement
- Fast response
- Hazardous area transmitter
Product Overview
- Accuracy ± 1 °C (± 1.8 °F)
- Compliance Note ATEX - II 1 G Ex ia IIC T4 (-20°C ≤ Ta ≤ +70°C) FM - IS / I / 1 / ABCD / T4 Ta = +70°C CSA - IS Class 1 Div 1 Groups ABCD T4 IECEx - Ex ia IIC T4 (-20°C ≤ Ta ≤ +70°C)
- Electrical Connection Screw Terminal
- Electrical Output 4 to 20 mA
- Enclosure Ratings IP66, NEMA Type 4
- Factory Setting Sensor fault: 23 mA; Under-range dew point: 4 mA; Over-range dew point: 20 mA
- Flow Rate Note 1 to 10 Nl/min (2.1 to 21.2 scfh), (5 Nl/min (10.6 scfh) optimum)
- Galvanic Isolation KFD2-CR-Ex1.20200 / KFD2-CR-Ex1.30200, KFD0-CS-Ex1.50P / KFD0-CS-Ex2.50P, KFD2-STC4-Ex1 H / MTL5041, MTL5040, MTL5541
- Housing Material Stainless Steel
- Load Resistance Max 250 Ω @ 12 V (500 Ω @ 24 V)
- Measurement Type Moisture
- Number of Wires 2
- Operating Humidity 0 to 100% RH
- Operating Pressure, Max 24 MPa
- Operating Temperature, Max 60 °C
- Operating Temperature, Min -40 °C
- Process Connection Type VCR Male
- Repeatability 0.5ºCdp (0.9ºFdp)
- Series ID PUR-IS-2W
- Supply Current 23 mA
- Supply Voltage 12 to 28 Vdc
- Temperature Measurement Range -120 to -40 °C
The Pura Hazardous Area Transmitter (PUR-IS-2W) makes it easier to connect measurements to your control loop across industrial and commercial environments. It fits into existing procedures without demanding special training. It helps you catch issues early, before they become downtime. It supports consistent data flow for alarms, logging, and control.