1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
OM-CP-PULSE101A
Choose a Variant
Measurement Type
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy | ± 1 min/month |
| Accuracy Detail | ±1 minute/month at 20°C, stand alone data logging |
| Battery Size and Type | 3.6V Li-ion |
| Battery life | up to 10 yr |
| Baud Rate | 115200 |
| Data Interface | USB |
| Display Measuring Units | °C, °F, ft/min, k/h, kts, m/s, mph |
| Electrical Connection | Removable Screw Terminal |
| Height | 2.5 in |
| Impedance Input | >60 kΩ |
| Internal Weak Pull-Up | <60 μA |
| LED Indicators | Green LED Blinks: 10 second rate to indicate logging; 15 second rate to indicate delay start mode;Red LED Blinks: 10 second rate to indicate low battery and/or full memory; 1 second rate to indicate an alarm condition |
| Length | 0.6 in |
| Materials | ABS, Aluminum |
| Measurement Type | Pulse |
| Memory | 500,000 readings; software configurable memory wrap 250,000 readings in multiple start/stop mode |
| Memory Modes | Yes |
| Multi Start/Stop Mode Note | To start the device press and hold the pushbutton for 5 seconds, the device has started logging; to stop the device press and hold the pushbutton for 5 seconds while the device is logging, the device has stopped logging |
| Number of Measurements | 1 |
| Operating Temperature, Max | 80 °C |
| Operating Temperature, Min | -40 °C |
| Protection | An optional password may be programmed into the device to restrict access to configuration options. Data may be read out without the password. |
| Pulse Rates | 10 kHz |
| Pulse Width, Min | ≥ 10 µsec |
| Real Time Recording | The device may be used with PC to monitor and record data in real-time |
| Relative Humidity | 0 to 95% RH non-condensing |
| Samples,Max | 1 sec |
| Sampling Rate | 1 Hz (1 update/second) |
| Software | XP SP3/Vista/7 and 8 (32 and 64-bit) |
| Start Modes | Delayed Start, Immediate Start, Push-button |
| Status Control | false |
| Supply Power Type | Battery |
| Voltage Input Range | 0 to 30 vdc |
| Weight | 0.9 oz |
| Width | 1.4 in |
| See All Specs | |
PDFs & Manuals
Software & Drivers
Show Ratings & Reviews
Rated 1 out of
5
by
RyanBrosInc from
Inaccurate
I bought this two months ago and have only used it once...and it was wildly inaccurate. Bench tested after reviewing the data and discovered it often times captured 3-7 pulses per known pulse input.
Date published: 2018-08-16