Besoin d'aide? Appelez-nous: 1-800-663-4209
IP510
Convertisseur robuste de courant I/P ou de tension E/P en pression
Heavy Duty Current I/P or Voltage E/P to Pressure Converter- Emplacements dangereux et classifications de sécurité intrinsèque
- NEMA 4X (IP65)
- Précision typique de 0,1 %
- Contrôle de rétroaction de pression en boucle fermée
IP510
À partir de
C$
1,248.09
Aperçu du produit
- Précision ± 0.1 %
- Précision ±0,25 % de la plage de sortie
- Effet de la température ambiante, max ±0,022 % de la plage nominale par ºF
- Homologations FM, CSA
- Connexion électrique Conduit femelle NPT 1/2 po
- Caractéristiques nominales du boîtier IP65, NEMA Type 4X
- Classification des risques Vmax = 30 Vcc, Imax = 100 mA, Ci = 0 µF, Li = 0 mH T4 Max. Ambiant 70°C. Voc et Isc d’une barrière ne doivent pas dépasser Vmax et Imax du transducteur. (Li + câblage) et (Ci + câblage) ne doivent pas dépasser La et Ca d’une barrière. Une barrière n’est pas nécessaire lorsque le transducteur se trouve dans l’un de ces emplacements.
- Hystérésis ±0,1 %
- Impédance 6000 Ω
- Signal de commande d'entrée N/A
- Remarque concernant la chute de tension de boucle Chute inférieure à 10 Vcc à 20 mA Chute inférieure à 10 Vcc à 50 mA
- Option de construction du matériau Approuvé CSA et FM
- Compatibilité avec les fluides Air ambiant / CVAC
- Température de fonctionnement, max 71 °C
- Température de fonctionnement, min -29 °C
- Taille du raccordement au process 1/4 po
- Type de raccordement au process NPT femelle
- Répétabilité ±0,01 %
- Remarque sur la répétabilité ±0,10 % de la plage de sortie
- ID de série IP510
- Portée, max 0,00013
- Plage Remarque 0,013 % de la plage étalonnée par ºF, 0,022 % de la plage étalonnée par ºF
- Température de stockage, max 93 °C
- Température de stockage, min -40 °C
- Approvisionnement Remarque Tension d'alimentation, Transducteur E/P : Sécurité intrinsèque/Non-inflammable : 9 à 28 VCC, moins de 20 mA Usage général : 9 à 40 VCC, moins de 20 mA
- Pression d'approvisionnement, max 100 psi
- Sensibilité à la pression d'approvisionnement Aucun effet
- Tension d'alimentation 9 à 40 Vcc
- Consommation d'air totale 0.07 SCFM
- Remarque sur la consommation d'air totale 0,07 SCFM (2 LPM) maximum
- Vibration Moins de 0,5 % de la plage par 1 g de 5 à 2000 Hz, 3 g maximum, 3 axes
Supported Applications
The Omega IP510 and EP510 series are heavy-duty electro-pneumatic converters designed for industrial control systems. These instruments reduce a supply pressure to a regulated output pressure that is directly proportional to an electrical input signal, functioning as Current I/P or Voltage E/P transducers.
Operating Conditions & Performance
The series provides closed-loop pressure feedback control with typical accuracy of ±0.1% of output span and maximum accuracy of ±0.25% of output span. Repeatability is typically ±0.01% of output span, while hysteresis ranges from a typical ±0.01% to a maximum ±0.10% of output span.
- Operating Temperature (Buna-N Elastomers): -29 to 71°C (-20 to 160°F)
- Operating Temperature (Fluorocarbon Elastomers): -18 to 71°C (0 to 160°F)
- Vibration Rating: Less than 0.5% of span per 1 g, 5 to 2000 Hz, 3 axes maximum
- Maximum Pressure Rating: 100 psig (6.9 bar) maximum
The devices require instrument quality air as defined by ISA Standard 57.0.01-1996, with a dew point not higher than 35°F, no particulates larger than 3 microns, and a maximum oil content of 1 ppm.
Configuration Options
The series supports multiple input signal types and pneumatic output ranges. Models are available in NEMA 1 (IP00) or NEMA 4X (IP66) enclosures to suit different environmental requirements.
- Input Signals: Current models accept 4 to 20 mA; Voltage models accept 1 to 5 Vdc
- Pneumatic Output Ranges: 3 to 15 psig, 3 to 27 psig, 6 to 30 psig, 0 to 60 psig, and 0 to 120 psig
- Power Supply Requirements: 9 to 28 Vdc for Intrinsically Safe/Non-Incendive; 9 to 40 Vdc for General Purpose
- Load Resistance: 6000 Ω minimum
Process connections include a ¼ NPT Supply Pressure Port and a ¼ NPT Gauge Port. Electrical connection is provided via a ¼ NPT electrical port or Coil Wire Connector.
Key Product Differences
The series distinguishes between Current to Pressure (I/P) models, designated with the IP prefix, and Voltage to Pressure (E/P) models, designated with the EP prefix. Enclosure ratings differentiate standard duty from hazardous location applications:
- NEMA 1 (IP00): Standard enclosure for general industrial environments.
- NEMA 4X (IP66): Ruggedized enclosure offering protection against water and dust, suitable for washdown or harsh conditions. Models with this rating carry the suffix '1' in the model number (e.g., IP511).
Wetted materials include standard Buna-N seals; Fluorocarbon seals are available as an option by adding the '-F' suffix to the model number. The series includes FM Approved and CSA Approved certifications, with Intrinsically Safe ratings for Class I, Groups A, B, C, D.
Afficher les évaluations et les avis
1) Can I run gases other than air?; 2) It states there is an air consumption rate up to 2 LPM. Does this mean it uses the high pressure gas to maintain pressure at the outlet? Its bleeding air all the time? Is the bleed port threaded?
Hello, this unit is rated for clean dry air. We are checking with engineering on the other questions and will email you directly.
Date published: 2023-11-06
Is this I/P convertor relieving? Ex. If the outlet pressure is higher than the set pressure setpoint, will the pressure be relieved through some exhaust?
These I/P converters have a bleed port that exhausts the excess air pressure to maintain the correct pressure.
Date published: 2022-10-19