TMIS-HEATER

Incoloy Flanged Immersion Heater for Severe Corrosive Solutions

0.0

(0)

3, 5 & 6 Inch, 150 lb (68 kg) Stainless Steel Flange
Rugged 0.475" Diameter Incoloy Sheath Heating Elements for Use in Severe Corrosive Solutions
240 and 480 V, 3 Phase
2 to 24 kW

See Product Overview

TMIS-HEATER

From ^C$ 8 487.31

Shop Models

3 Variations available

See all series options below

Data Sheet

Product Overview

Applications Chemicals
Enclosure Type General Purpose
Flange 3 in
Form factor Flanged Immersion
Heated Medium Corrosive Fluids
Hole Diameter 2.54 cm
Number of Circuits 1
Number of Heating Elements 3
Number of Phases 3
Sheath Diameter 0.475 in
Sheath Material Incoloy

Incoloy flanged immersion heater designed for severe corrosive solutions. Features rugged 0.475" diameter Incoloy sheath heating elements with 3", 5", or 6" stainless steel flanges rated at 150 lb. Available in 240 and 480 V, 3-phase configurations with power ranging from 2 to 24 kW. Ideal for explosion-resistant, water-based corrosive environments. Hole diameter: 2.54 cm.

APPLICATIONS
For severe corrosive solutions. For solutions with chemicals with more severe corrosive properties than can be used with other sheath materials and where corrosive action is accelerated by higher sheath temperatures. For heavy solution concentrations in the 30 to 50% range. It should be noted that with high concentration, only the less corrosive chemicals may be put in the solution.

CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warnings.