1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
THX-400-THERMIST-PROBES
Quick Disconnect Thermistor Probes with 2-prong Connectors
Models In Stock
- For Use with Heavy-Duty
- Available in GP General Purpose
- Available in AP Air Probe
- Available in NP Needle Probe
- 12” Std Probe length
- Made with 304 Stainless steel
- Made with high precision 44033 thermistor element, rated up to 100°C (212°F)
THX-400-THERMIST-PROBES
From
C$
278.49
Models In Stock
Product Overview
- Accuracy ± 0.1 °C (± 0.18 °F)
- Cable Length 10 ft
- Cable Type Insulated Coiled
- Electrical Connection Standard Male Thermocouple Connector
- Nominal Resistance 2252 Ω
- Nominal Resistance/Curve Note 2252 Ω @ 25°C/75°F
- Number of Wires 2
- Process Connection Size N/A
- Process Temperature, Max 100 °C
- Sheath Material 304 Stainless Steel
- Temperature Sensor Type Thermistor
- Thermocouple Type N/A
Description
The THX-400-GP probe sutable for use with an HDX handle is ideal for general purpose immersion measurement in gases and liquids. Made from a rugged 1/8" (3.1 mm) O.D. 304 stainless steel sheath 12" (304 mm) long, the probe will adapt to most process applications. A high precision 44033 thermistor element is used (2252 ohm @ +25°C), which provides 0.1°C interchangeability and a temperature range of -40 to 100°C (-40 to 212°F).The THX-400-AP is designed for HVAC applications. The small diameter sheath and radiant energy shield easily fit into duct work, grilles and vents. The probe will work with the OMEGA HDX handle or can be permanently mounted using OMEGALOK compression fittings. Made from a rugged 3/16" (4.8 mm) O.D. 304 stainless steel sheath 12" (304 mm) long, the tip is perforated to expose the thermistor bead to air flow for fast, accurate measurements. The 44033 precision thermistor element is rated to 100°C (212°F).
The THX-400-NPsharp pointed probe is used with a rugged HDX handle. It will easily pierce soft and semi-frozen material as well as soil and sand. Made from a rugged 1/8" (3.1 mm) O.D. 304 stainless steel sheath 12" (304 mm) long. A high precision 44033 thermistor element is used which provides 0.1°C interchangeability and a temperature range of -40 to 100°C (-40 to 212°F).
The OMEGA HDX Handle is suitable for use with these quick disconnect probes. It must have an uncompensated OST connector and copper extension cord.
PDFs & Manuals