Need assistance? Call us: 1-800-663-4209
SMPW-CC
Cable Clamp Miniature Thermocouple Connectors
Models In Stock
- Ultimate Thermocouple Connector Plug or Jack
- Integral Cap, Strain Relief + Cable Clamp
- New Labor Saving Wire Assembly
- Fast + Easy Wire Termination
SMPW-CC
From
C$
9.16
Models In Stock
Product Overview
- Additional Features 2 Clamp Cap
- Materials Glass-Filled Nylon
- Number of Pins Sockets 2
- Operating Temperature, Max 180 °C
- Operating Temperature, Min -29 °C
- Series ID SMPW-CC
Supported Applications
The Omega SMPW-CC Series consists of miniature thermocouple connectors featuring an integral cable clamp cap. Designed for compact installations, these connectors provide a secure termination point for temperature sensing cables while offering strain relief and environmental protection in space-constrained applications.
Operating Conditions & Performance
The SMPW-CC Series is constructed from glass-filled nylon rated for an ambient operating temperature of -29 to 180°C (-20 to 356°F). The series supports wire gauges ranging from 40 AWG to 20 AWG, accommodating both stranded and solid conductors. It also accepts overbraid, TWSH, or armored cables up to a maximum outer diameter of 5.5 mm (0.22 in).
Minor discoloration may occur between 150°C (302°F) and 180°C (356°F); however, electrical properties remain unaffected within this range.
Configuration Options
The series offers a comprehensive selection of thermocouple types with specific compensating alloys for male and female configurations. Available alloy codes include K, T, J, E, R/S, C, U, and N. Each connector type is color-coded per ANSI standards (e.g., Yellow for Type K, Blue for Type T).
Key design features across the series include:
- Mechanical Assembly: Integral cap with cable clamp, captive cover screws, and captive clamp screws.
- Wire Termination: Contact washers enable quick connect wire termination without requiring a wire loop; an internal wire divider separates conductors.
- Housing Features: Includes a write-on window for identification and combination Phillips/slot screw heads. Assembly is performed 100% from the top side.
- Packaging Options: Connectors are available as single units or in bulk packs of 5, 50, or 100 (e.g., OSTW-CC-***-***).
Solid pin male connectors are available by adding the suffix "-S" to the model number. Accessories include the SMP-CC-TOOL Quick Assembly Tool and various silicone wire grommets for strain relief.
Key Product Differences
Variants within the SMPW-CC Series are distinguished by thermocouple alloy type, gender (Male or Female), and packaging quantity. The model number format follows SMPW-CC-<Alloy Code>-<Gender> (e.g., SMPW-CC-K-M for Type K Male).
Differences in physical dimensions exist between male and female connectors:
- Female Connector Dimensions: 34.11 mm (1.3 in) length, 25.4 mm (1.0 in) width, 8 mm (0.31 in) height.
- Male Connector Dimensions: 29.57 mm (1.2 in) length, 12.7 mm (0.5 in) width, 8 mm (0.31 in) height.
Bulk packaging options are identified by the OSTW-CC series code followed by calibration type and quantity suffixes.
PDFs & Manuals
Accessories
accessories
cables
Show Ratings & Reviews
Rated 5 out of
5
by
codger from
Nice evolution
Every time I buy a new batch of thermocouple connectors, Omega has done something to make the design more foolproof (always good) and closer to idiot-proof (much harder). This latest design is excellent.
Date published: 2016-03-03
Rated 5 out of
5
by
K Cruz from
Good
Good product, right dimensions, accurate specifications.
Date published: 2021-04-06
Rated 3 out of
5
by
Mark from Dura from
Good part, poor service
Part works great, but it took forever to actually get something that was supposedly in stock.
Date published: 2016-12-05
Rated 5 out of
5
by
Mikael from
Online ordering was a breeze
Made it really easy to order online and automated email when you order ships is great!
Date published: 2026-04-20
Rated 5 out of
5
by
Scott Edgecomb from
Very good strain relief
These connectors have improved with the new strain relief on the connectors, it helps protect delicate thermocouple wires.
Date published: 2025-11-10
Rated 5 out of
5
by
Carl James from
Fast Shipping
Exact part we needed. it was hard to get the qty we needed elsewhere
Date published: 2025-09-08
Rated 5 out of
5
by
Joseph7476 from
High Quality
the miniature size thermocouple connectors fit our application
Date published: 2025-08-18
Rated 5 out of
5
by
Joseph7476 from
High Quality
the cable clamp cap SMPW connectors fit our application perfectly
Date published: 2025-08-18
Do these come in different colors, or does anyone have any DIY tricks for color coding? My applications use these in critical spots and in high volume, where mismatch mistakes can be painful in lost time and troubleshooting.
I realize all K-type's are yellow. I'm asking if it is either available, or possible to order, K-types of different colors. Tools our factory uses have up to 30 of these installed, and even a single mismatch mistake by a maintenance team can result in extensive downtime in troubleshooting. So we are trying to explore color coding options to help identify pairing.
Date published: 2021-12-23
What are the recommended torque values for the cover screws?
Thank you for your inquiry. The thread type is 3-48 and the torque spec is 3.2 inch-pounds.
Date published: 2026-03-30
I have an Omega HH12A that is about 12 years old. Can I still get the yellow plug with the 1 meter thermocouples?What is the part # and how much each? The Certificate of Traceable Calibration: HH12A 07110271
Thanks for your question Charley. If you are looking for the thermocouples without the adhesive backing you are going to want to look at the SRTC series. Those come with the thermocouple and connector. If you are looking for the thermocouple with a silicone adhesive backing the series you are going to be looking for is the SA1 thermocouples. For the yellow connector, that would be K type thermocouple. The insulation, wire gauge and length can be altered to your specific needs.
Date published: 2021-01-15
Why don't you list the thermocouple tolerances (accuracy) in your specifications or manuals?
Hi Peter1547
Thank you for the feedback. Our thermocouple spec pages provide logo showing "SLE" indicating the probes listed will meet the SLE specifications. SLE specifications are detailed in following link;
https://www.omega.com/en-us/colorcodes
Best regards
OMEGA
Date published: 2024-04-01
What is the purpose of the 2.5 mm hole located between the + and - symbols near the end of the connector? Is it for grounding? Can it be used for mounting?
The hole has no electrical connection and can be used to secure the connector to a surface if the user wishes to use it that way.
Date published: 2024-12-10
What are the electrical properties for the SMPW-CC-K-F?
These connectors are meant to carry millivolt signals generated by Thermocouples so there are no electrical ratings like on a electrical plug.
Date published: 2024-12-18
Do you have parts for the mini yellow k thermal coupler plug ins like new paper inserts for writing on and do you have a new seals
Thank you for your inquiry. Unfortunately, we do not sell spare parts for this connector.
Date published: 2024-07-18
What is the measurement tolerance spec on this (SMPW-CC-K-M ) connector?
Thank you for your inquiry. Thermocouple connectors do not have affect measurement tolerance. Only the thermocouple itself can affect tolerance.
Date published: 2023-11-29