Need assistance? Call us: 1-800-663-4209
PX119
OEM Style, Compact Pressure Transmitters
Models In Stock
- Compact and affordable for OEM applications
- Easily configurable, now with expanded options
- Reliable outputs with signal conditioning
- Durable, stainless steel housing resists corrosion in harsh industrial environments
PX119
From
C$
210.42
Models In Stock
Product Overview
- Accuracy ± 0.5 %
- Accuracy Detail 0.50% BFSL Accuracy
- Compensated Temperature, Max 85 °C
- Compensated Temperature, Min 0 °C
- Enclosure Material 304 Stainless Steel
- Enclosure Ratings IP65
- Materials, Wetted 304 Stainless Steel, Alumina, Buna-N (NBR)
- Operating Temperature, Max 135 °C
- Operating Temperature, Min -40 °C
- Output Wiring (Pin 1) Supply +
- Output Wiring (Pin 2) Supply -
- Process Connection Type NPT Male
- Protection Overvoltage, short circuit, reverse polarity
- Response Time 1 ms
- Series ID PX119
- Stability <0.3% FS
- Supply Voltage 8 to 30 Vdc
- Weight 70 g
The PX119 series compact pressure transmitters offer ±0.5% accuracy and a fast 1 ms response time. Featuring a durable stainless steel housing with IP65 rating and NPT male process connection, they deliver reliable 4-20 mA outputs ideal for OEM applications. Easily configurable with expanded options, these lightweight (70 g) transmitters provide cost-effective, corrosion-resistant performance in harsh industrial environments.
Pressure Without the Pain
Ideally suited for material handling, industrial and mobile equipment applications where a small, yet rugged SS body size is desired at a reasonable price point. The body is machined from a single piece of stainless steel to provide added protection for the internal electronics as well as prevent corrosion from most applications. A piezoresistive ceramic sensor along with ASIC signal conditioning provides an excellent thermally compensated output.
Applications:
- Monitor air brake pressure
- Monitor pressure/height in vehicle suspension
- Regulate pneumatic door operation
- Monitor excessive load
- Monitor lift operation
- Monitor compact pressure
Accessories
accessories
Show Ratings & Reviews
I need to use this pressure sensor to get data from a pneumatics braking system on a small vehicle. We are using an arduino to collect data. Adruinos can measure between 0-5 V DC but it cannot measure current directly. Can it be used for this application?
You can convert the 4 to 20mA of the PX119 to a 1 to 5VDC with the use of a 250 ohm resistor across the input terminals of you readout
Date published: 2021-02-02
Are these National Sanitation Foundation (NSF) certified?
These pressure transducers are not NSF certified
Date published: 2019-12-31
CAD model available?
Hello, Omega's Tech Support has emailed you the PX119 CAD drawing for your review. Thanks for reach out to us and if you need further assistance please contact our Tech Support department.
Date published: 2019-04-17
Can the PX119 be used to measure hydraulic pressure? 2250 psi max
The PX119-3KGI will give a 4 to 20 mA output over a 0 to 3000 psig range. 2250 psi is 75% of this range so the output would be 16 mA. Please contact our Technical Support to discuss your application needs or if you need further assistance.
Date published: 2018-07-20
When we connect pressurized air to a PX119-150AI transducer, air is leaking out the back of the transducer around the electical connector. This is not the behavior we expected. Please explain why air pressure is leaking through the sensor.
The diaphragm has been damaged. Usually caused by overpressure of the sensor.
Date published: 2020-09-18
Is the 3D CAD available? I need info on the threads for the installation setup.
Thank you for your inquire.
We at this time do not have a 3D model.
The PX119 has a standard Process Connection: ¼ NPT male
Hope this was helpful
Date published: 2020-07-21
Can these transducers be install within a test article that is then placed within a pressure chamber; and have the pressure in the pressure chamber is to be increased up to 75 PSIA, while the transducer(s) monitor the pressures within the unit?
Hello, the PX119 will have a 1/8 NPT male threaded fitting at the bottom, which will thread into a Manifold or T fitting etc, the sensing element will be at the end of the orifice in the 1/8 NPT threaded port. The entire unit itself may not be subject to vacuum/pressure.
Your question/application is unclear, I would suggest calling and talking to our application specialists at 1800 622 2378.
Date published: 2024-11-04
For the PX109A-030A5V, which has a cable connection, is the recommended cable accessory (CA-319-4PC24-XXX-WP) necessary?
The CA-319-4PC24-XXX-WP is not necessary for the PX109A-030A5V transducer
Date published: 2024-04-24