1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
OM-CP-HITEMP140X2-FP-Series
Enregistreurs de données à haute température, sondes de température à distance doubles
High Temperature Data Loggers, Dual Remote Temperature Probes
Modèles en stock
- OM-CP-HITEMP140X2-FP-72 dispose de deux sondes flexibles
- Les modèles OM-CP-HITEMP140X2-FP-72-PT-1 et OM-CP-HITEMP140X2-FP-72-PT-5 sont équipés d'une sonde flexible et d'une sonde pliable en acier inoxydable
- La sonde flexible mesure de -60 à 260 °C (-76 à 500 °F)
OM-CP-HITEMP140X2-FP-Series
À partir de
C$
1 815.71
Modèles en stock
Aperçu du produit
- Autonomie de la batterie jusqu'à 1 an
- Taille et type de batterie 3,6 V Li-ion
- Étalonnage Étalonnage numérique via logiciel
- Interface de données USB
- Remarque sur l'interface de données Station d’accueil USB OM-CP-IFC400 ou interface multiplexeur OM-CP-IFC406 requise ; 125 000 bauds
- Diamètre 24.6 mm
- Caractéristiques nominales du boîtier IP68
- Facteur de forme Portatif
- Hauteur 48 mm
- Matériaux en contact avec le fluide Acier inoxydable 316, PEEK, Polyuréthane
- Type de mesure Température
- Mémoire 32767
- Remarque sur la mémoire 32 767 relevés
- Nombre de mesures 2
- Température de fonctionnement, max 140 °C
- Température de fonctionnement, min -40 °C
- Lectures en mode Paramètres de déclenchement 16 383 relevés
- Enregistrement en temps réel Peut être utilisé avec un PC pour surveiller et enregistrer les données en temps réel
- Humidité relative, max 1
- Humidité relative, min 0%
- Échantillons, max 33000
- Fréquence d'échantillonnage 1 Hz (1 mise à jour/seconde)
- Note sur la fréquence d'échantillonnage 1 lecture toutes les secondes à 1 toutes les 24 heures.
- ID de série OM-CP-HITEMP140X2-FP-Series
- Compatibilité logicielle Windows XP SP3/Vista/7 et 8 (32 et 64 bits)
- Modes de démarrage Départ différé réglable, Démarrage immédiat
- Modes d'arrêt Arrêt différé réglable, Manuel via le logiciel
- Type d'approvisionnement électrique Batterie
- Résolution de température 0,01 °C
- Type de capteur de température RTD
- Précision temporelle 1 minute/mois @ 25°C (77°F)
- Poids 110 g
The OM-CP-HITEMP140X2-FP Series of dual channel high temperature data loggers feature a stainless steel data logger body and are available with either two 183 cm (72') flexible probes (OM-CP-HITEMP140X2-FP-72) or with one flexible probe and a stainless steel bendable probe combination (OM-CP-HITEMP140X2-FP-72-PT-1 and OM-CP-HITEMP140X2-FP-72-PT-5).
The dual probes of the OM-CP-HITEMP140X2-FP Series allow for simultaneous temperature monitoring and provide flexibility in applications such as oven mapping, surface temperature monitoring, autoclave validation and sterilization processes.
The OM-CP-HITEMP140X2-FP-72 model offers two 183 cm (72') long, lightweight, flexible RTD probes coated with PFA insulation. The FP probe design allows the probe to be easily maneuvered and is ideal for temperature monitoring inside test tubes, small vials, and other delicate applications. The narrow thermistor probe tip is compatible for use with the OM-CP-MICRODISC probe attachment allowing for precise surface temperature monitoring of shelving and more.
The OM-CP-HITEMP140X2-FP-72-PT-1 and OM-CP-HITEMP140X2-FP-72-PT-5 models feature a 61 cm (24') stainless steel bendable probe with the option of either a 2.5 cm (1') or 12.7 cm (5') probe tip (sheath). The stainless steel probe can be bent, angled, and coiled in any direction and formed into position as needed. The sharp probe tip allows for easy insertion and has an extended measurement range of -200 to 350°C (-328 to 662°F).
The body of the OM-CP-HITEMP140X2-FP data loggers are capable of operating in temperatures from -40 to 140°C (-40 to 284°F). All models have the capacity to store up to 32,700 time and date stamped readings and feature non-volatile solid state memory that will retain data even if the battery becomes discharged.
The OM-CP-HITEMP140X2-FP utilizes the latest software. The device can be started, stopped, and data can be downloaded quickly and easily. Once in the software, the data can be reviewed in graphic, tabular, or summary form as well as exported to Excel® for further analysis and calculations.
The dual probes of the OM-CP-HITEMP140X2-FP Series allow for simultaneous temperature monitoring and provide flexibility in applications such as oven mapping, surface temperature monitoring, autoclave validation and sterilization processes.
The OM-CP-HITEMP140X2-FP-72 model offers two 183 cm (72') long, lightweight, flexible RTD probes coated with PFA insulation. The FP probe design allows the probe to be easily maneuvered and is ideal for temperature monitoring inside test tubes, small vials, and other delicate applications. The narrow thermistor probe tip is compatible for use with the OM-CP-MICRODISC probe attachment allowing for precise surface temperature monitoring of shelving and more.
The OM-CP-HITEMP140X2-FP-72-PT-1 and OM-CP-HITEMP140X2-FP-72-PT-5 models feature a 61 cm (24') stainless steel bendable probe with the option of either a 2.5 cm (1') or 12.7 cm (5') probe tip (sheath). The stainless steel probe can be bent, angled, and coiled in any direction and formed into position as needed. The sharp probe tip allows for easy insertion and has an extended measurement range of -200 to 350°C (-328 to 662°F).
The body of the OM-CP-HITEMP140X2-FP data loggers are capable of operating in temperatures from -40 to 140°C (-40 to 284°F). All models have the capacity to store up to 32,700 time and date stamped readings and feature non-volatile solid state memory that will retain data even if the battery becomes discharged.
The OM-CP-HITEMP140X2-FP utilizes the latest software. The device can be started, stopped, and data can be downloaded quickly and easily. Once in the software, the data can be reviewed in graphic, tabular, or summary form as well as exported to Excel® for further analysis and calculations.
Logiciels & Pilotes
Afficher les évaluations et les avis
Where is the USB connection? Do you unscrew the bottom of the capsule and the USB connection is there?
Hello, thank you for your question. To connect to your computer you would need the docking station OM-CP-IFC400 (sold separately). There is no need to open the logger, you would just place it in the docking stations which has a USB connection to your computer.
Date published: 2024-07-30
Is the NIST certification included with the purchase?
Thank you for your question. Yes, NIST calibration cert is included
Date published: 2023-05-15
In my bendable probe many bends are there. I need to straight all the bends. what can i do for that.
Thank you for your question. The coiled stainless probe can be uncoiled to whichever length you require.
Date published: 2020-06-24