Need assistance? Call us: 1-800-663-4209
MTS-1-Heaters
Stainless Steel Immersion Heater 1.25 in NPT Process Water
- 1 ¼' NPT Stainless Steel Passivated Screw Plug
- Stainless Steel Passivated Elements
- High Watt Density (43 to 86 W/in2)
- 1 to 2 kW
MTS-1-Heaters
From
C$
1,244.23
Product Overview
- Form factor Passivated screw plug immersion
- Heating Element Diameter 15.5 cm
- Number of Heating Elements 2
- Number of Phases 1
- Process Connection Material Stainless Steel
- Process Connection Size 1 1/4 in
- Process Connection Type NPT Male
- Series ID MTS-1-Heaters
- Sheath Material Stainless Steel
Supported Applications
The Omega MTS-1 Series consists of screw plug immersion heaters designed for process water applications. These units feature stainless steel passivated elements and a 1¼ NPT stainless steel passivated screw plug connection.
A critical operational requirement is that this immersion heater must be used with an approved temperature control device to assure safe operation, as the series is supplied without a thermostat.
Operating Conditions & Performance
The MTS-1 Series operates on 120 and 240V, 1 phase power supplies. The heaters are available in wattage ratings from 1 to 2 kW with high watt density ranging from 43 to 86 W/in².
- Wattage: 1 to 2 kW
- Power Supply: 120 and 240V, 1 phase
- Watt Density: 43 to 86 W/in²
- Screw Plug Connection: 1¼ NPT stainless steel passivated screw plug
The series utilizes two heating elements per unit across all configurations.
Configuration Options
Variants are defined by wattage, voltage, and enclosure type. The model number guide follows the format MTS-<kW>-<Voltage>-<Enclosure Type>, with examples including MTS-110-3 and MTS-110-3E2.
Enclosures
The series offers two distinct enclosure options:
- E1 general purpose, NEMA 1 (IP00) rated
- Type E2 moisture-resistant/explosion-resistant enclosure
Certifications and Approvals
Approvals vary by the selected enclosure type:
- E1 General Purpose Enclosures: UL Listed, CSA certified
- E2 Moisture-Resistant/Explosion-Resistant Enclosures: CSA NRTL/C certified. Note that these are not intended for use in hazardous areas.
Dimensions and Weight
The overall dimension B is 15.5 cm (6 in) across all wattage configurations. Weights vary by enclosure type:
- E1 General Purpose: 0.9 kg (2 lb)
- E2 Moisture-Resistant/Explosion-Resistant: 2.3 kg (5 lb)
Key Product Differences
The MTS-1 Series is differentiated by power output and enclosure rating, which directly impacts the model number suffix.
- Wattage Options: 1 kW, 1.2 kW, 1.5 kW, and 2 kW
- Voltage Options: 120V or 240V (both available for each wattage)
- Enclosure Suffixes: Models ending in "-3" denote the E1 general purpose enclosure, while models with an "E2" suffix indicate the moisture-resistant/explosion-resistant type.
PDFs & Manuals
Show Ratings & Reviews