1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
EHF
Chauffage à ailettes pour montage en surface, bande canalisée 200, 700 W
Surface Mount Finned Channel Strip Heater 200, 700 W
Modèles en stock
- Bornes à vis décalées 10-32 (style T4) standard, autres terminaisons disponibles
- Composant reconnu UL
- Gaine et ailettes en acier inoxydable
- Installation facile avec supports de montage spéciaux pour boîtier
EHF
À partir de
C$
391.58
Modèles en stock
Aperçu du produit
- Connexion électrique Cosses de raccordement n° 10
- Matériau des ailettes Acier nickelé
- Facteur de forme Montage en surface
- Hauteur 1.375 in
- Tolérance de longueur Jusqu’à 0,61 m (24") ±1/16", au-delà de 0,61 m (24") ±1/8"
- Longueur entre les trous de montage 11,375 po
- Taille de la fente de montage 8 x 13 mm
- Tolérance de puissance 5 %, -10 %
- Tolérance de résistance 10 %, -5 %
- ID de série EHF
- Matériau de la gaine Acier inoxydable 304
- Température maximale de la gaine 650 °C
- Taille de la fente pour la douille secondaire 13 x 16 mm
- Largeur 2 in
- Calibre du fil 16 AWG
OMEGA® finned strip heaters are extremely efficient and dependable as a heat source for hundreds of industrial and commercial applications. They are used for both forced (mounted in a duct) and natural convection air heating (mounted at the bottom of cabinet type ovens).
The finned strip heaters basic design consists of a helically wound resistance coil placed in a specially designed ceramic insulator. The resistance coil is mechanically connected to the screw terminal for positive connection. Stainless steel rectangular tubing is used to house the heater assembly. All remaining voids are filled with high purity magnesium oxide to increase thermal conductivity and dielectric strength. Nickel-plated steel fins (stainless steel optional) are mounted to the rectangular tubing. The fins have been specially designed to provide maximum surface contact for good heat dissipation into the finned cross sections, thus resulting in rapid heat transfer to the air.
OMEGA finned strip heaters are manufactured in a full line of standard sizes, electrical ratings and terminations, or can be made to your specs.
The finned strip heaters basic design consists of a helically wound resistance coil placed in a specially designed ceramic insulator. The resistance coil is mechanically connected to the screw terminal for positive connection. Stainless steel rectangular tubing is used to house the heater assembly. All remaining voids are filled with high purity magnesium oxide to increase thermal conductivity and dielectric strength. Nickel-plated steel fins (stainless steel optional) are mounted to the rectangular tubing. The fins have been specially designed to provide maximum surface contact for good heat dissipation into the finned cross sections, thus resulting in rapid heat transfer to the air.
OMEGA finned strip heaters are manufactured in a full line of standard sizes, electrical ratings and terminations, or can be made to your specs.
Afficher les évaluations et les avis