SP-014-Series

Omega Link M12 Modular Smart Probe Analog Process interface with I/O

Models In Stock

This item has been discontinued. We are retiring the Omega Link product line and transitioning to SensoScientific — the industry’s most advanced wireless monitoring platform, now a key part of our unified DwyerOmega portfolio.

See Product Overview

SP-014-Series

From ^C$ 258.75

Models In Stock

Shop Models

1 Variations available

See all series options below

Data Sheet

Product Overview

Approvals CE, UKCA
Configuration Configurable via Omega Link Smart Interface and SYNC configuration software
Digital Input VinHighThreshold = 2.2 VMAX, VinLowThreshold = 0.3 VMIN, VinMAX = 30 VDC
Digital Output 2x Open Drain 100 mA max, VMAX = 30 VDC
Enclosure Ratings IP67
Input Control Signal Current Loop: 4 to 20 mA, Voltage: 0 to 1.0 Vdc, 0 to 2.0 Vdc
Input Note ON: 1.0 Vdc, OFF: 0.7 Vdc, Internal Pull Up/Down: 1.5k to 3.0 Vdc, Comparator (Pulse) Input: 100 mV, 500 mV, 1.0 Vdc, 2.0 Vdc
Length 96.7 mm
Number of Channels 3
Number of I/O 2
Operating Temperature, Max 85 °C
Operating Temperature, Min -40 °C
Software Compatible with OEG, SYNC, and OMEGA Cloud
Supply Power Type DC
Supply Voltage 2.8 to 3.3 Vdc
Width 22.1 mm

The Omega Link SP-014 Process Monitoring Smart Probe provides an easy way to integrate process signals to your Omega Link Ecosystem. The SP-014 accepts standard process signals through its M12 5-pin connector and Omega Link Smart Interfaces through its M12 8-pin connector. The optional M12.5-S- M-FM connector can be utilized to easily connect wire leads to your SP-014.

Each of the 3 process inputs may be independently configured as 0-24 mA or 0-1.0 V_DC inputs.

Intuitive Configuration

Configure your Omega Link Smart Probe using SYNC’s intuitive configuration interface.

Edge Control and Built in I/O

The Omega Link SP-014 features 2 configurable digital I/O pins. These can be used for a myriad of applications including driving relays, physical alarms, or sensing dry contacts like door switches. The SP-014 can also be utilized as an edge controller, with autonomous independent decision-making capabilities to generate local alarms or provide control outputs based on sensor inputs.

Smart Core Enabled

Smart core is integral to all Omega Link Smart Probes. This powerful suite of advanced features enable plug and play connectivity, alarms and notifications, data assurance, data logging, and storage.

Smart Interface Modularity

Customize your Omega Link Ecosystem with modular Smart Interfaces that connect and transmit data from your Smart Probe to the Omega Link Cloud.

Your Data at a Glance with Omega Link Cloud

Omega Link Cloud consolidates and brings your data to you when you need it, wherever you are. The intuitive cloud interface allows you to monitor and store your data, set alarms and alerts, and provides insights on device activity. Visit the OMEGA website for more details.