Nickel-Immersion

Nickel RTD Immersion

Nickel-Immersion

From

Shop Models

0 Variations available

Data Sheet

Product Overview

Accuracy 21.1ºC (70ºF): +/- 0.17ºC (+/- 0.34ºF))
Alloy Material (-) Copper
Alloy Material (+) Copper
Applications Air and HVAC, Boilers, Clean Water and Purified Solutions, Environmental Monitoring, Flow Measurement
Approvals DIN 43760
Electrical Connection Pigtails
Enclosure Ratings IP10, IP66, NEMA Type 1, NEMA Type 3R, NEMA Type 4X
Fitting Polyamide 66 (High Performance Nylon)
Insertion Length 1 in
Insulation Etched Teflon (PTFE) Colored Leads
Insulation Color Red
Number of Sensing Points 1
Operating Current 5 mA
Operating Humidity 10 to 95% RH, non-condensing
Operating Temperature, Max 121 °C
Operating Temperature, Min -40 °C
Pad Material EPDM, Neoprene, SBR Polymer
Probe Diameter 0.25 in
Process Connection Size 1/2 in
Process Connection Type NPT Male
Response Time 8 Seconds nominal
Self Heating Effect 0.3 °C / mW
Series ID Nickel-Immersion
Sheath Material 304 Stainless Steel
Stability +/- 0.05% after 1000 Hours @ 150ºC (302ºF)
Storage Temperature, Max 85 °C
Storage Temperature, Min -40 °C
Temperature Coefficient DIN 43760
Temperature Measurement Range -40 to 121°C
Temperature Sensor Type 1,000 Ohm Nickel RTD
Thermowell Note ½” NPS (National Pipe Straight) Female Thread
Wire Gauge 22 AWG