Besoin d'aide? Appelez-nous: 1-800-663-4209
RH700-Series
Enregistreur de données thermo-hygrométrique multifonctionnel
Multi-Functional Thermo-Hygrometer Data Logger
Modèles en stock
- Mesure : valeurs d'humidité, d'humidité relative, de température et de pression
- Stocke/rappelle 20 ensembles de lectures
- Enregistre jusqu'à 8 000 points de données en interne
- Alarmes haute et basse programmables pour l'humidité relative, le niveau d'humidité relative et le niveau d'humidité absolue
RH700-Series
À partir de
C$
890.12
Modèles en stock
Aperçu du produit
- Échelle d'humidité absolue 0,5 à 240 mg/m^3
- Fonctions supplémentaires 1 Capacité d'enregistrement des données
- Échelle de pression atmosphérique 30 à 120 kPA
- Plage GPP Échelle Plage GPP : 0 à 999 ; GPP : (0 à 160g/kg)
- Longueur 185 mm
- Température de fonctionnement, max 75 °C
- Température de fonctionnement, min -29 °C
- Mesure de l'humidité sans broches Profondeur 19 mm
- Température maximale du processus 60 °C
- Température minimale du processus -60 °C
- Niveau d'humidité relative/absolue 0 à 99,9
- Précision de l'humidité relative ± 2,5 % HR
- Remarque sur la précision de l'humidité relative ± 2,5 % de 11 à 90 % HR ; ± 3 % HR en dessous de 11 % et au-dessus de 90 %
- Temps de réponse 60 s
- Fréquence d'échantillonnage 2 Hz (2 mises à jour/seconde)
- ID de série RH700-Series
- Tension d'alimentation 9 Vcc
- Échelle de pression de vapeur 0 à 20,0 kPA
- Poids 175 g
- Remarque sur le poids 175 g (6,2 oz.) sans pile
- Largeur 72 mm
Supported Applications
The Omega RH700 is a handheld, multi-functional thermo-hygrometer data logger designed for measuring ambient temperature and humidity parameters alongside material moisture levels. The series supports applications requiring the assessment of wallboard, masonry, hardwood, softwood, soil, paper, and powders using its integrated pinless or penetrating probe capabilities.
Operating Conditions & Performance
The RH700 operates across an ambient temperature range of -40 to 199.9 °C (-40 to 392 °F). Measurement accuracy is specified as ±0.5 °C (±0.9 °F) for Ambient Temperature, Dew Point, Wet Bulb Temperature, Surface Temperature, and Condensation Temperature; Relative Humidity accuracy is ±3% RH. Absolute Humidity and GPP (Mixing Ratio) are accurate to within ±3% of reading, while Atmospheric Pressure and Vapor Pressure maintain an accuracy of ±1 hPa.
Moisture level measurements in both Pinless Mode and Pin Mode achieve an accuracy of ±3% WME (Wood Moisture Equivalent). The device features a typical response time for humidity of 10 seconds in still air. Resolution is provided at 0.1 °C (0.1 °F) for temperature parameters, 0.1% RH for relative humidity, and 1 hPa for pressure measurements.
Configuration Options
The series offers a comprehensive set of measurement functions within a single handheld unit with a plastic gray and yellow housing. Key configurable capabilities include:
- Data Logging & Memory: Internal storage supports up to 8000 data points with date/time stamps, plus the ability to store/recall 20 pairs of readings in nonvolatile memory.
- Sensor Options: Includes a built-in pinless moisture sensor and an external pin-type probe. Surface temperature and condensation temperature measurements require an optional K-type thermocouple probe.
- Data Interface: Features a USB connector for data download to a PC using included software, driver, and cable; output is displayed as Excel-formatted graphs or tables on Windows PCs.
- User Functions: Includes settable high/low alarms for RH and moisture levels, Min/Max tracking, Data Hold, 30-minute Auto Power Off, and a backlit LCD with 3-digit primary and 4-digit secondary readouts.
Key Product Differences
The RH700-Series is supplied as the RH700 unit. The standard package includes the pin-type moisture probe, sensor protection cap, PC interface program on a mini-disc, USB cable, 9V battery (included), user's manual, and soft carrying pouch. Field calibration is available in pinless moisture level mode.
PDF & Manuels
Accessoires
consumables
Afficher les évaluations et les avis
What specific weight is the MI and ME mode assuming for the material being tested?
Thank you for your inquiry. There is no specification for specific weight for the material being tested for the MI and ME mode settings. The RH700 has two separate moisture level measurement modes: MI
and ME. In MI mode, the meter uses a non-invasive (pinless) sensor on the back of the unit to detect moisture on or within 0.75 in. (19 mm) of the surface of a material. In ME mode, the meter uses the included pin-type probe to measure the conductivity of a material as a proxy for its moisture content.
Date published: 2019-07-16
Does the product come with a certificate of calibration?
The RH700 comes with a Certificate of Conformance also known as a CAL-1.
Date published: 2020-03-03
What does the COND measuring mode exactly do?
Thank you for your inquiry. The "COND measuring mode" is a condensation temperature mode
indicator that illuminates when the instrument is displaying the condensation temperature (when condensation will form).
Date published: 2019-07-16