LCM1000-BP4-LCM1000-TP4

Supported Applications

The Omega LCM1000 series provides top and bottom mounting plates designed specifically for the LCM1001/LCM1011 series load cells. These accessories support force measurement applications requiring capacities from 250 kgf to 25,000 kgf.

Operating Conditions & Performance

The mounting plates are engineered for use with the specified LCM1001/LCM1011 load cell series across a capacity range of 250 kgf to 25,000 kgf. The product overview confirms availability in alloy and nickel-plated steel or 17-4 PH stainless steel materials.

Configuration Options

The LCM1000 series is divided into two distinct sub-series to accommodate different mounting configurations:

• LCM1000-TP4 Series (Top Plates): Designed as top mounting plates.
• LCM1000-BP4 Series (Bottom Plates): Designed as bottom or base mounting plates.

Material options include nickel-plated steel and 17-4 PH stainless steel. The series supports the full capacity envelope of 250 kgf to 25,000 kgf for both top and bottom plate configurations.

Dimensions by Series

The following dimensions are provided in millimeters (mm) with inches (in) as printed:

• Top Mounting Plates (LCM1000-TP4 Series):
• A: 114 mm (4.50)
• B: 57 mm (2.25)
• C: 95 mm (3.75)
• D: 46 mm (1.88)
• E: 38 mm (1.50)
• F: 10 mm (0.41)
• G: 3.2 mm (0.125)
• H: 19 mm (0.75)

• Bottom Mounting Plates (LCM1000-BP4 Series):
• A: 114 mm (4.50)
• B: 57 mm (2.25)
• C: 95 mm (3.75)
• D: 46 mm (1.88)
• F: 10 mm (0.41)
• H: 19 mm (0.750)
• J: 16 mm (0.625)
• K: 15 mm (0.59)
• L: 60 mm (2.38)

Model Number Configuration

The series follows the model number guide format LCM1000--. Examples include:

• Nickel-plated steel top plates: LCM1000-TP4
• Stainless steel top plates: LCM1000-TP4-SS
• Nickel-plated steel bottom plates: LCM1000-BP4
• Stainless steel bottom plates: LCM1000-BP4-SS

Key Product Differences

The primary distinction within the series is between top and bottom mounting configurations. The LCM1000-TP4 models serve as top plates, while the LCM1000-BP4 models function as base or bottom plates. Both sub-series share identical overall dimensions for parameters A through D but differ in specific features such as parameter E (present on top plates) and parameters J, K, and L (specific to bottom plates). Material variations are indicated by the suffix "-SS" for 17-4 PH stainless steel; models without this suffix utilize nickel-plated steel. All units are made in USA.