Need assistance? Call us: 1-800-663-4209
LCEB
Low Profile, Mini Beam Load Cell for Low Capacities
Models In Stock
- Very High Precision
- Low Profile - 1" Height
- High Repeatability
- 100% Creep Tested
LCEB
From
C$
460.22
Models In Stock
Product Overview
- Cable Length 5 ft
- Calibration Option NIST
- Creep in 20 min ± 0.15%
- Electrical Connection Cable
- Hysteresis ± 0.02%
- Input Resistance 350 +50/-3.5 Ω
- Load Cell Type Bending Beam
- Operating Temperature, Max 90 °C
- Operating Temperature, Min -55 °C
- Output Resistance 350 ± 3.5 Ω
- Overload, Max ± 400% FS
- Process Temperature, Max 65 °C
- Process Temperature, Min -15 °C
- Repeatability ± 0.01%
- Safe Overload 150% FS
- Series ID LCEB
- Supply Power Note 10 Vdc, 15 Vdc maximum
- Supply Voltage 10 to 15 Vdc
- Thermal Span Effect ± 0.0008% FS/°F
- Thermal Zero Effect ± 0.0015% rdg/°F
- Wiring/Connector Table Green: (+) Output; White: (-) Output; Black: (-) Input; Red: (+) Input
- Zero/Balance Error ± 1%
Supported Applications
The LCEB Series is a low-profile MiniBeam load cell offering exceptional accuracy in compression. With a 1" height, high repeatability and 100% creep testing, it is designed for controlled-environment measurement — in general, anywhere a digital readout is used — where small size, low creep and stable performance matter.
The cells span capacities from 5 lb (2.3 kgf) to 250 lb (114 kgf) and pair with compatible meters such as the DPIS, DP41-S and DP25B-S, making them a practical choice for test stands, laboratory force measurement and OEM weighing.
Operating Conditions & Performance
Accuracy is ±0.03% full scale, with repeatability of ±0.01% full scale and hysteresis of ±0.02% full scale. Rated output is 3 mV/V nominal.
Excitation is 10 Vdc (15V maximum) across a bridge resistance of 350 Ω ±3.5 Ω, with connection through a 1.5 m (5') 4-conductor shielded, color-coded cable. The aluminum-bodied cell operates over an ambient range of -55 to 90°C, and NIST-traceable calibration is included. The low-profile body stands 25.7 mm high with a 60.5 mm base length.
Configuration Options
The eight models differ almost entirely by rated capacity, from the 5 lb (2.3 kgf) LCEB-5 up to the 250 lb (114 kgf) LCEB-250. Every model shares the same electrical performance — ±0.03% full scale accuracy, 3 mV/V output and a 350 Ω bridge — so selection is driven by the force to be measured rather than by any change in signal behavior.
Physical size is likewise consistent: the lower-capacity models stand 25.7 mm tall, while the highest-capacity 250 lb (114 kgf) LCEB-250 is marginally taller at 25.9 mm.
Key Product Differences
- LCEB-5 — 5 lb (2.3 kgf) capacity
- LCEB-10 — 10 lb (4.5 kgf) capacity
- LCEB-25 — 25 lb (11 kgf) capacity
- LCEB-50 — 50 lb (23 kgf) capacity
- LCEB-75 — 75 lb (34 kgf) capacity
- LCEB-100 — 100 lb (45 kgf) capacity
- LCEB-150 — 150 lb (68 kgf) capacity
- LCEB-250 — 250 lb (114 kgf) capacity
Show Ratings & Reviews
Hi, Could we use 5vdc excitation with this product? Does it affect the precision or the linearity spec ? Thanks
You can use 5VDC without effecting the accuracy or linearity. The only difference would be that the output signal of the load cell would be 0 to 15mV instead of 0 to 30mV
Date published: 2023-06-09
Would this LCEB series load cell hold up to tests with very high relative humidity? (10-100%) Would it's measuring capabilities be compromised?
The LCEB has an IP65 environmental rating. It should be able to handle dust and water ingress
Date published: 2024-02-19