1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
RDA-Series
Enregistreur sans papier à faible coût avec écran tactile couleur
Low Cost Paperless Recorder with Color Touch Screen Display
Modèles en stock
- Écran tactile couleur TFT : 5 pouces ou 7 pouces
- 2, 4 ou 6 entrées isolées pour les modèles à thermocouple ou RTD
- 2 seuils d'alarme internes par canal
- Fréquence d'échantillonnage maximale de 1 Hz
RDA-Series
À partir de
C$
1,022.30
Modèles en stock
Aperçu du produit
- Précision ± 0,2 % FS ± 1 chiffre
- Fonctions supplémentaires 1 Exportation USB
- Homologations CEM
- Refroidissement Refroidissement naturel par air
- Interface de données USB
- Remarque sur l'affichage Couleur : Couleur véritable TFT, Résolution : 800 x 480, Rétroéclairage : DEL longue durée, Méthode d'entrée : Toucher de l'écran, Écran tactile : Résistif à quatre fils
- Résolution d'affichage 800 x 480 Pixels
- Type d'affichage Écran LCD
- Remarque concernant les indices de protection des boîtiers EMC : 4KV/5KHz selon IEC61000-4-4 (Transitoire Rapide Électrique) ; 4KV selon IEC61000-4-5 (Surtension Électrique)
- Hauteur 105 mm
- Isolation Entre les bornes d'alimentation, de contact de relais ou de signal 2300Vcc, Entre les bornes électriquement isolées 600V
- Longueur 100 mm
- Type de mesure Température
- Montage Montage mural
- Température de fonctionnement, max 60 °C
- Température de fonctionnement, min -10 °C
- Humidité relative 90 % HR
- Temps de réponse ≤1,5 secondes
- Fréquence d'échantillonnage 1 Hz (1 mise à jour/seconde)
- ID de série RDA-Series
- Température de stockage, max 80 °C
- Température de stockage, min -20 °C
- Approvisionnement Remarque 100 à 240 VCA, -15 %, +10 % / 50 à 60 Hz,Consommation d’énergie : ≤5W
- Type d'approvisionnement électrique CA
- Tension d'alimentation 100 à 240 Vca
- Effets thermiques ≤0,01 % FS/°C
- Largeur 145 mm
The RDA Paperless Multi-Channel Touch Screen Paperless Thermocouple or RTD Recorder Series is a value priced large format touch screen data logger that integrates measurement, display, alarm, and data logging into one slim instrument. The RDA Series is available in both 5'' and 7'' display models. The instrument is easy to install and requires no external HMI. Depending on the model, the RDA Series can support 2, 4 or up to 6 input channels with either thermocouple or RTD input type with 0.2% FS measuring accuracy. Each channel can have independent input specification, with square-root, multiplication, addition and subtraction. All channels are equipped with digital adjustment and filtering functions. The RDA Series provides a real time trend records via trend graph or bar graph. History and alarm records can be reviewed in the logger itself with 150 MB of internal storage or exported to external USB storage device. The RDA-740 and RDA-760 models have a slim installation depth of 40 mm of for use where installation space is limited.
PDF & Manuels
Afficher les évaluations et les avis
Hello, I would like to know what happens when the memory of the chart recorder reaches the maximum (150 MB): does it stop recording or do it overwrite on historical data? If it overwrites, does it do it starting from the oldest data? Thanks
Hi Lale
Thank you for the inquiry. When memory is full the newest data will over write the oldest data.
Best regards
OMEGA
Date published: 2024-03-27
Does cold junction compensation require an external thermal resistor?
Hi Jimbo1831,
Thankyou for the inquiry. The cold junction compensation sensor is built in the RDA unit.
Best regards
OMEGA
Date published: 2021-10-27
Why does advanced function not allow me to enter 128 to create equation output? I can put in any number up to 128, but not the value required.
Hi Engineer6543,
Thank you for the inquiry. Please forward this question to TEMP@OMEGA.COM.
Best regards
OMEGA
Date published: 2022-08-26
How long does the internal memory last if recording 24hr a day?
Hi Steve,
The number of channels and the logging interval will impact the active logging period available. For 2 channels at 10 second interval you would have several months capacity.
Best regards
OMEGA
Date published: 2022-09-22
Is there a way to take a screenshot of the temperature plots?
Hi Rlied
Thank you for the inquiry. There is no screen capture function or video output feature unfortunately.
Best regards
OMEGA
Date published: 2021-08-26
My logger does not "store" any data. The History and the DataList tabs only start taking data once I go into that screen. If I exit back out to the Panel screen, any previous data is lost.
Hi TimRMC,
Thankyou for the inquiry. Please forward this question to TEMP@OMEGA.COM.
Best regards
OMEGA
Date published: 2022-10-04
Does the unit come with a power supply?
Thank you for your inquiry. This unit does not come a power supply. This unit requires 100 to 240 Volts AC Signal to be hard wired to it.
Date published: 2023-12-05
Can I use the "Sc" button to apply an offset to the thermocouples connected to the chart recorder? If so, does the "Sc" value correspond to the offset I want to apply? I have a RDA-760-TC
Hi Darvida,
Thank you for the inquiry. Sc is a display offset to correct for probe errors. But value for each count is 0.1 on the display count.
Best regards
OMEGA
Date published: 2023-12-05