Need assistance? Call us: 1-800-663-4209
TCS-H-CB
Integral Cable Thermocouples Type T, J & K Sanitary Probes
- 1/4' Diameter Probe Design for Standard Duty, or
- 3/8' to 3/16' Stepped Probe Design For Heavy Duty Applications
- Probe Lengths of 3', 4', 5' and 6' Available From Stock, Other Lengths Also Available
- Process Connection is a 1½'-16 AMP Tri-Grip™ (Tri-Clamp® Compatible) Standard Conforming to ASME BPE-2007. Other Cap Sizes and Styles are Available.
TCS-H-CB
From
C$
247.52
Product Overview
- Electrical Connection Stripped Leads
- Insulation Polyurethane
- Junction Type Ungrounded
- Process Connection Type Tri-Clamp
- Process Temperature, Max 200 °C
- Process Temperature, Min -50 °C
- Series ID TCS-H-CB
- Sheath Material 316L Stainless Steel
- Temperature Sensor Type Thermocouple
Supported Applications
The Omega TCS-H-CB series comprises Integral Cable Sanitary Thermocouple Probes designed for use in Clean-In-Place (CIP) systems and sanitary processes. These sensors provide a millivolt signal proportional to temperature, utilizing ungrounded thermocouple elements with 316L stainless steel wetted surfaces finished to 32 microinch or better.
Operating Conditions & Performance
The series operates within a process temperature range of -50 to 200°C (-58 to 392°F). Accuracy is specified as Special Limits of Error, varying by thermocouple type. The standard response time for the heavy-duty probe design is listed in supporting documentation as 3 seconds max (63%). Wetted materials consist of 316L SS with a surface finish of 32 μin or better.
Configuration Options
The TCS-H-CB series offers configurable options for probe length, thermocouple calibration type, and cable configuration to accommodate specific sanitary installation requirements.
- Thermocouple Types: Available in Type J (Iron/Constantan), Type K (Chromel/Alumel), Type T (Copper/Constantan), or Type E (Chromel/Constantan).
- Process Connection: Standard 1½" 16 AMP Tri-Grip™ fitting, compatible with Tri-Clamp® systems.
- Probe Dimensions: Features a heavy-duty design with a stepped probe stem. The sheath diameter is ⅜", stepping down to ⅜" at the probe tip. Standard probe lengths include 3", 4", 5", and 6"; custom lengths longer than 6" are available (e.g., 9¼" or 12").
- Electrical Connection: Integral cable with nylon clamp, standard length of 10' (120") PFA insulated and jacketed #24 AWG thermocouple cable. Includes molded strain relief and stripped leads.
- Cable Length Options: Configurable lengths include the standard 10' (120"), with variants available for other lengths such as 20' (240") or custom requirements per model number suffix.
Key Product Differences
The series distinguishes between heavy-duty and standard probe configurations via the model code. The "H" designation indicates a Heavy-Duty design with a stepped stem, while other variants may utilize different structural profiles depending on the specific part number configuration.
- Model Number Structure: Follows the format TCS-(*U-H-<PROBE_LENGTH>-D1-CB-120), where "*" represents the thermocouple type (J, K, T, or E) and U denotes an ungrounded element.
- Cable Length Suffixes: The numeric suffix indicates cable length in inches; for example, 120 corresponds to 10' (120") and 240 corresponds to 20'. Custom lengths are indicated by changing the probe length code (e.g., "0300" becomes "0925" for a 9¼" probe).
- Wire Color Codes: Positive wire colors vary by type: Blue for Type T, Yellow for Type K, White for Type J, and Purple for Type E. The negative wire is always Red (Constantan).
