Need assistance? Call us: 1-800-663-4209
ARMTI3-HEATER
Incoloy Immersion Heater 2.5 in NPT Solution Water Thermostat
- Thermostat for Reliable Operation
- Incoloy Sheath for Compatibility with Most Industrial Fluids
- 240 and 480 V Models with 3 Phase Power
- 3 to 18 kW
ARMTI3-HEATER
From
C$
3,634.62
Product Overview
- Additional Features Integral Thermostat
- Form factor Screw Plug Immersion
- Heated Medium Water, Water-Based solutions
- Number of Phases 3
- Process Connection Material Stainless Steel
- Process Connection Size 2 1/2 in
- Process Connection Type NPT Male
- Series ID ARMTI3-HEATER
- Sheath Diameter 0.475 in
- Sheath Material Incoloy
- Thermostat Type Bulb, capillary
Supported Applications
The Omega ARMTI-3 Series consists of solution water immersion heaters designed for reliable operation with a thermostat. These units feature an Incoloy sheath compatible with most industrial fluids and are intended for use in non-hazardous areas where temperature control is required.
Operating Conditions & Performance
The series operates on 3-phase power at either 240 V or 480 Vac. Wattage ranges from 3 to 18 kW, with a documented power density of 46 to 51 W/in². The heaters utilize an integral bulb and capillary thermostat configured for two temperature ranges: 60 to 250°F (standard) or 0 to 100°F (T-1 option). A critical safety note states that the integral thermostat functions as a temperature control only; it is not a fail-safe device, and an approved pressure or temperature control must be used with these heaters for safe operation.
Configuration Options
The ARMTI-3 Series offers configurable options across wattage, voltage, enclosure type, and thermostat range. Key specifications include:
- Power & Voltage: Available in 3-phase configurations for 240 Vac or 480 Vac.
- Wattage Options: Models are offered at 3 kW, 4.5 kW, 6 kW, 7.5 kW, 9 kW, 12 kW, 15 kW, and 18 kW.
- Enclosure Types: General Purpose (NEMA 1 rated) or Type E2 moisture-resistant/explosion-resistant enclosures are available.
- Sensor & Control: Includes a bulb and capillary thermostat with selectable ranges of 60 to 250°F or 0 to 100°F.
- Process Connection: Features a 2½ NPT stainless steel screw plug.
- Sheath Material: Constructed with an Incoloy sheath, 3 cm (0.475") in diameter.
The overall length of the heater varies by model and wattage selection. Electrical connections are provided via a hole for 1.9 (0.75) conduit.
Key Product Differences
Variants within the series differ primarily by enclosure rating, power input voltage, and thermostat range:
- Enclosure Rating: Models with General Purpose enclosures are UL Listed and CSA Certified. Models equipped with Moisture Resistant/Explosion Resistant (Type E2) enclosures are CSA NRTL/C Certified.
- Voltage Suffixes: The model number suffix indicates the voltage; insert "240" for 240 Vac or "480" for 480 Vac.
- Thermostat Range Options: Standard models cover the 60 to 250°F range. Models with the T-1 designation are configured for the 0 to 100°F range.
PDFs & Manuals
