1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
DPS20-Series
Strain Meter - 6 Digit Display with 3 Relay Outputs
Models In Stock
DPS20-Series
From
C$
528.61
Models In Stock
Product Overview
Show Ratings & Reviews
Rated 5 out of
5
by
RR Complete from
Strain Meter
Works great easy to program m
Date published: 2021-05-06
Can a 59k Ohm shunt sensitivity value be used for high load calibration? How would this be done?
I should clarify, I need to complete the empirical characterization of the load cell step in the setup instructions for the strain meter. I do not need to adjust the calibration of the load cell itself. I'm using Omega PN 336253 30k lb through-hole load cell, with a calibration sensitivity of 1.758 mV/V and a shunt sensitivity at 59 kOhm of 1.485 mV/V.
Date published: 2024-07-09
What units does the load cell display? How does it take into account calibration information from the load cell manufacturer?
Hello Mechman, thank you for contacting omega. The unit will display just an absolute value based on what you enter the max reading to be, while scaling the unit. You may scale the meter to display any engineering units. This will not show the actual units itself.
You will have to scale the meter manually before using this unit by using the sensitivity value on the calibration certificate.
Date published: 2022-12-30
Is there a guide on how to send a RTU command to this strain gauge? If not, is there preexisting software that one could use to connect to the strain gauge via the serial port?
Hello, it appears you have emailed pressure@omega.com and you have a ticket number, the engineer is working on your case diligently. In case you have more questions, please email pressure@omega.com (reference Case
01666367)
Date published: 2024-10-09
Can this be used to measure a rosette strain gauge like the SGD-2-120-RY51?
The DPS20 display are designed to use with strain gage bridge based load cells and display values in units of force. They do not work well if you try to scale them to read units of strain directly. You would be better off using our DP8EPT-006 digital display.
Date published: 2024-04-02
Can a 700 ohm load cell be used with this meter?
The DPS20 display will work with 700 ohm full bridge load cell.
Date published: 2024-08-01
How can I connect this meter with LCB103B-25 ? When I connect the meter with the load cell, the meter just displayed "0" and didn't change value. Please share detail instruction or video for initial setting if you have it.
Please contact us directly at 1-800-826-6342 for assistance. There is no video that we can provide at this time.
Date published: 2024-04-05