Alert: DwyerOmega offices and shipping warehouses will be closed for the holidays Dec. 25-26, 2025 and Jan 1, 2026
CNIS844
1/32 DIN Models iS32 Strain and Process Meters and Controllers
Choose a Variant
Cutout Dimensions
Control Action
Data Interface
Control Output
Retransmission/Analog Output
Pulsed 10 Vdc at 20 mA Pulsed Driver 10 Vdc at 20 mA /for use with external SSR
Solid State Relay/0.5 A at 120/240 Vac continuous Pulsed Driver 10 Vdc at 20 mA /for use with external SSR
SPDT Relay Solid State Relay/0.5 A at 120/240 Vac continuous
Pulsed 10 Vdc at 20 mA
Pulsed 10 Vdc at 20 mA Relay SPDT 3A at 120/3 A at 240 Vac
Analog Output 0 to 10 Vdc Solid State Relay/0.5 A at 120/240 Vac continuous
Analog Output 0 to 10 Vdc Relay SPDT 3A at 120/3 A at 240 Vac
Analog Output 0 to 10 Vdc Pulsed Driver 10 Vdc at 20 mA /for use with external SSR
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy | ± 0.03 % |
| Analog-to-Digital Technique | Dual slope |
| CMRR | 120 dB |
| Commodity Code | 9032.89.6075 |
| Control Action | Action: Reverse (heat) or direct (cool) |
| Control Output | N/A |
| Cutout Dimensions | 1.772 x 3.622 in |
| Data Interface | N/A |
| Decimal Selection | 0,001, 0,01, 0,1, None |
| DepthValue | 8.1 |
| Digital Filter | Programmable |
| Display Note | 4-digit 9-segment LED 10.2 mm (0.40"); i32, i16, i16D, i8DV 21 mm (0.83"); i8 10.2 mm (0.40") and 21 mm (0.83"); i8DH RED, GREEN, and AMBER programmable colors for process variable, setpoint and temperature units |
| Display Type | LED |
| ECCN | EAR99 |
| Electrical Connection | Screw Terminal |
| Enclosure Ratings | IP65, NEMA Type 4, NEMA Type 4X |
| Form factor | 1/8 DIN |
| GrossWeightValue | 0.15 |
| Height | 1.89 in |
| HeightUoM | IN |
| HeightValue | 0.6 |
| Impedance Input | 10 MΩ for 100 mV;1 MΩ for 1V or 10 Vdc |
| Input Range Note | 0 to 100 mVdc,-100 mVdc to 1 Vdc, 0 to 10 Vdc, 0 to 20 mA |
| Input Type | Single Ended, Voltage, Current, Strain, Temperature |
| Isolation | Power to Input/Output: 2300 Vac per 1 minute test For Low Voltage Power Option: 1500 Vac per 1 minute test Power to Relay/SSR Output: 2300 Vac per 1 minute test Relay/SSR to Relay/SSR Output: 2300 Vac per 1 minute test RS232/485 to Input/Output: 500 Vac per 1 minute test |
| Length | 5 in |
| Linearization Points | Up to 10 |
| Measurement Type | Current, Strain, Temperature, Voltage |
| Mounting | Panel |
| NMRR | 60 dB |
| NetWeightValue | 0.15 |
| Number of Digits | 4 |
| Number of Inputs | 5 |
| Number of Relays | N/A |
| Offset Adjustment | -1999 to 9999 |
| OkForExport | true |
| Operating Temperature, Max | 55 °C |
| Operating Temperature, Min | 0 °C |
| Output Detail | DC Pulse: Non-isolated; 10 Vdc @ 20 mA |
| Output Signal | DC Pulse |
| Polarity | Unipolar |
| RTD Type | 100/500/1000 Ω Pt |
| Reading Rate | 3/sec |
| Relative Humidity | 90% RH non-condensing |
| Resolution | 10/1µV |
| Retransmission/Analog Output | Pulsed 10 Vdc at 20 mA Pulsed Driver 10 Vdc at 20 mA /for use with external SSR |
| Sampling Rate | 3 Hz (3 updates/second) |
| Sensor Excitation | 24 Vdc @ 25 mA (not available for low-power option) |
| Series ID | i-Series-Strain |
| Set Point Adjustment | Menu Configurable |
| Step Response | 0.7 s for 99.9% |
| Supply Power Note | Power: 90 to 240 Vac ± 10%, 50 to 400 Hz*, 110 to 375 Vdc, equivalent voltage |
| Supply Power Type | AC |
| Supply Voltage | 90 to 240 Vac |
| Temperature Stability | 50 ppm/°C |
| Thermocouple Type | J, K, T, E, R, S, B, C, N, L |
| Weight | 127 g |
| WeightUoM | LB |
| Width | 3.78 in |
| WidthValue | 3.5 |
| Country of Origin | Mexico |
| See All Specs | |
PDFs & Manuals
Show Ratings & Reviews