Need assistance? Call us: 1-800-663-4209
Series-DL6
HVAC Pressure, Temp & RH Data Logger, 32k Readings, Remote Sensors
- Economical solution for basic differential monitoring
Series-DL6
From
C$
2 758.80
Product Overview
- Battery Size and Type 3.6V Li-ion
- Clock Accuracy ± 8 s/day plus one sampling interval
- Compensated Temperature, Max 158 °F
- Compensated Temperature, Min 32 °F
- Input Type Temperature, Pressure, RH
- Drift ± 0.2% FS/yr
- Electrical Connection Screw Terminal
- Measurement Type Pressure, Relative Humidity, Temperature
- Media Compatibility Clean dry air / inert gas, HVAC / room air, Inert / non-reactive gases, Helium, Nitrogen, Non-Corrosive Dry Gases
- Memory 32,768 Readings
- Number of Channels 5
- Operating Temperature, Max 160 °F
- Operating Temperature, Min -50 °F
- Power Consumption 5 to 10 µA
- Pressure Accuracy ± 1 %
- Measurement Pressure, Min 0 psi
- Measurement Pressure Type Gauge
- Proof Pressure 4x Full Scale
- Relative Humidity 0 to 95%, Non-Condensing
- Resolution 8 bits (1 in 256)
- Sensor Type Thermistor
- Series ID Series-DL6
- Stop Modes Adjustable Delay Stop
- Supply Power Note 3.6 V TL5134 lithium metal battery, internal, factory replaceable
- Supply Power Type Battery
- System Requirements IBM compatible 386 or above and Windows® 3.1 or later with 2 MB RAM and 2 MB hard drive disk space, one serial port
- Temperature Accuracy ± 1%
- Temperature Resolution 0.7 °F
- Weight 5 oz
Supported Applications
The Dwyer Series DL6 is a self-powered data logger designed to monitor pressure, temperature, and relative humidity. The series identity centers on HVAC system monitoring and troubleshooting, verifying energy management systems, and tracking the performance of pneumatically controlled valves.
- HVAC system diagnostics
- Energy management verification
- Pneumatic valve performance tracking
Operating Conditions & Performance
The Series DL6 operates within an ambient temperature range of -50 to 160°F (-45 to 70°C) and supports a humidity rating of 0 to 95% RH, non-condensing. The logger stores up to 32,768 readings using a built-in internal thermistor for ambient temperature measurement with an accuracy of ±1% FS.
Pressure modules are available in three specific ranges:
- DL6005: 0 to 5 psig (30 kPa)
- DL6030: 0 to 30 psig (200 kPa)
- DL6100: 0 to 100 psig (700 kPa)
The internal thermistor measures -40 to 158°F (-40 to 70°C). The pressure sensor is compatible with air and noncorrosive gases; it is not intended for liquid pressure measurement. The unit features a resolution of 8 bits (1 in 256) and includes an internal, factory-replaceable 3.6 V TL5134 lithium metal battery.
Configuration Options
Sensors & Accessories
- DL690: Remote Humidity/Temperature Sensor (sold separately)
- DL691: Plug-in Humidity Sensor (sold separately)
Data Management
The logger interfaces with Model DL200 Windows® software and a connecting cable, which are sold separately. Data is uploaded to an IBM PC or 100% compatible computer for analysis using TrendReader software.
Key Product Differences
Variants within the Series DL6 differ primarily by pressure range configuration:
- The DL6005 model is configured for a 0 to 5 psig (30 kPa) range.
- The DL6030 model covers the 0 to 30 psig (200 kPa) span.
- The DL6100 model supports up to 0 to 100 psig (700 kPa).
All models share a compact housing constructed from polyphenylene ether and polystyrene, with overall dimensions of approximately 3-3/8 in x 2-31/32 in x 29/64 in. The unit weighs 5 oz (110 g) and features removable screw terminals for electrical connection.
PDFs & Manuals
Show Ratings & Reviews
