OM-CP-ULTRASHOCK-Series

Humidity, Temperature, Pressure and Tri-Axial Shock Data Logger Part

(0)

Built-In Accelerometers
All Inclusive Design
Compact
Programmable Start Time

See Product Overview

From ^C$ 1,130.00

Shop Models

1 Variations available

See all series options below

Data Sheet

Product Overview

Acceleration Range ± 5 g
Accelerometer Sensor Type MEMS
Accuracy Detail Calibration Accuracy : Humidity : ±3 %RH (±2 %RH typical at 25 °C), Pressure : ±1.0% FSR 25°C; ±0.2% typical, Temperature : ±0.5°C (0 to 50°C); Time Accuracy : ±1 min per month at 2 to 30°C
Approvals CE
Battery life up to 170 hr
Battery Size and Type Alkaline 9V
Baud Rate 115200
Calibration Digital calibration through software and automatically recorded within device
Calibration Accuracy Humidity : ±3% RH, Temperature : ±0.5 °C, Pressure : ±1%, Accelerometer : ±0.2 g
Data Interface USB
Data protection Access by password
Frequency Response 0 to 400 Hz
Height 111 mm
Humidity Range 0 to 95% RH non-condensing
Length 89 mm
Materials Aluminum
Measuring Temperature Range, Max 60 °C
Measuring Temperature Range, Min -20 °C
Memory 174,762 Readings
Millivolt Range N/A
Number of Measurements 6
Operating Temperature, Max 60 °C
Operating Temperature, Min -20 °C
Measurement Pressure, Max 0 psi
Pressure Sensor Type Silicon Strain Gage
Measurement Pressure Type Absolute
Process Connection Size 1/4 in
Process Connection Type N/A
Real Time Recording Device can be used with PC to monitor and record instantaneous measurements in real-time
Relative Humidity Sensor Type Capacitive Polymer
Resolution Pressure : 0.002 psi, Humidity : 0.1% RH, Temperature : 0.1°C, Acceleration : 0.01 g
Sampling Rate 1.953 msec
Sampling Rate Note 1.953 ms/512 Hz 64 Hz to 5 minutes for shock, selectable in software. Temperature, pressure and humidity sampled approximately every 2 seconds at intervals shorter than 2 seconds. Otherwise, sampled at the reading rate.
Software Windows XP SP3 / Vista / 7 and 8 (32 and 64 - bit)
Start Modes Delayed Start, Immediate Start
Supply Power Type Battery
Temperature Sensor Type Silicon Diode
Time Accuracy ±1 minute/month
Weight 341 g
Width 26 mm

A newer version of this product is available with better features at a lower price! Please see OM-CP-SHOCK Series.

The OM-CP-ULTRASHOCK is a battery powered, stand alone temperature, pressure, humidity and 3-axis shock recorder.
The OM-CP-ULTRASHOCK measures and records temperature, pressure and humidity at the selected reading rates, while shock is recorded as the peak acceleration levels over the same interval.
The OM-CP-ULTRASHOCK is specifically designed for documenting dynamic environments such as moving vehicles, trucks, containers, ships, etc. The device is also valuable in characterizing environments such as production and assembly lines of delicate electronics, IC fabrication, communications and computer components.
This compact, portable, easy to use device will measure and record up to 174,762 measurements per channel. The storage medium is non-volatile solid state memory, providing maximum data security even if the battery becomes discharged. The device can be started and stopped directly from your computer and it’s small size allows it to fit almost anywhere. The OM-CP-ULTRASHOCK makes data retrieval quick and easy. Simply plug it into an empty COM or USB port and our user-friendly software does the rest.

PDFs & Manuals

OM-CP-ULTRASHOCK-Series_spec OM-CP-THERMALERT-RH-Series View More

View Less

Software & Drivers

OM_CP_4_3_1_0_ZIP View More

View Less

Compliance