Need assistance? Call us: 1-800-663-4209
PCL819
Handheld Pressure Calibrator with Internal Pressure Pump
- Pompa di pressione elettrica interna genera pressione da -0,8 a 20 bar (-12 a 300 psi)
- Precisione fino a 0,025% FS
- Genera e misura 4 a 20 mA
- Alimentazione a loop 24 Vdc per alimentare il dispositivo sotto test
Product Overview
- Accuratezza Dettagli ±0,015% della lettura ±2 conteggi (simulazione e misurazione); Precisione della tensione: ±0,015% della lettura ±2 conteggi (solo misurazione)
- Funzionalità aggiuntive 1 Modulo di pressione intercambiabile
- Dimensioni e tipo della batteria Alcalina AA
- Dettagli costruttivi Pompa pneumatica azionata elettricamente genera da -0,8 a 20 bar (-12 a 300 psi)
- Accuratezza della corrente ± 0.015 %
- Collegamento elettrico Spina a banana
- Collegamento elettrico Nota Connessione RTD: 4 pin stile LEMO ; Modulo esterno: 6 pin stile LEMO
- Fattore di forma Portatile
- Funzioni Sorgente di pressione & Riferimento di pressione & Indicazione del segnale
- Altezza 200 mm
- Lunghezza 60 mm
- Temperatura di esercizio, max 50 °C
- Temperatura di esercizio minima -10 °C
- Accuratezza della pressione ± 0.025 %
- Dimensioni attacco al processo 1/8 pollici
- Tipo di attacco al processo NPT femmina
- Tipo di pompa Pneumatico
- ID serie PCL819
- Temperatura di stoccaggio, max 60 °C
- Temperatura di stoccaggio, min. -20 °C
- Accuratezza della temperatura ± 0,1 °C
- Nota sull'accuratezza della temperatura ±0,1°C (0,2°C) (solo misurazione)
- Accuratezza della tensione ±0,015%
- Peso 1.2 kg
- Larghezza 100 mm
OMEGAs PCL819 combines a high performance handheld pressure calibrator with an integral electric pressure pump in a small, lightweight, handheld unit. Before this innovation, users had to manually generate pressure using cumbersome manual pumps or large, heavy boxes with limited portability and battery life. The PCL819 is only slightly larger than the PCL340 series and weighs in at a mere 1.2 kg (2.5 lb). The housing is easily contoured to fit a technicians hand with good balance top to bottom. The internal pump can generate vacuum or pressure from -12 to 300 psig. The PCL819 has an internal isolated pressure sensor with 0.025% of full scale accuracy and comes in three gauge and two absolute pressure ranges. It is also compatible with the PCL-PM series external pressure modules which come in ranges from 5 to 5000 psig and also differential, absolute and compound ranges. A PCL-PMA module adaptor is required to use external modules. In addition to pressure the unit also has an input for Pt100 RTD sensors for temperature and can measure and simulate 4 to 20 mA current loops. The large LCD graphic display can be configured to display up to 3 variables at the same time by the user. It provides a number of convenience features such as switch testing, percent error, and a damping function. Up to 5 frequently used configuration can be stored and retrieved with one button recall.
PDFs & Manuals
Show Ratings & Reviews
is the display selectable for different scales? I.E. inH2o, Bar ,PSI
There are 15 units of measure that can be selected by the user during setup. They are: psi, bar, mbar, kPa, MPa, kgcm2, mmH2O @ 4°C, mmH2O @ 20°C,
cmH2O @ 4°C, cmH2O @ 20°C, inH2O @ 4°C, inH2O @ 20°C, inH2O
@ 60°F, mmHg @ 0°C, inHg @ 0°C
Date published: 2021-12-28
Can this device be powered by a wall outlet instead of battery power?
No.
Per page 42 in manual:
Power Requirements
Battery
12 VDC
Eight (8) AA alkaline, Lithium or NiMh cells
Date published: 2025-01-29