1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
RTD-809-Series
Glue-On RTD Surface Sensors with Coin Style SS Housing
Models In Stock
- Flat Disc Shape is Ideal for Surface Temperature Measurements
- Bonds to Surfaces for Measuring Heat Loss or Operating Temperatures
- Sensor Contains a High-Accuracy, 100 Ohm, Class “A” DIN Platinum Element. 1 meter (40') or PFA Insulated & Jacketed Cable and 3-Pin Miniature Connector
- Temperature Coefficient (Alpha) = .00385 ohm/ohm/°C
Product Overview
- Accuracy Class A
- Accuracy Detail Class A DIN per IEC60751
- Cable Clamp PCLM-MTP
- Cable Length 40 in
- Cable Material Nickel, Copper
- Electrical Connection 3-Prong Miniature Male Thermocouple Connector
- Insulation PFA
- Mating Connector 3-Prong Miniature Female Thermocouple Connector
- Nominal Resistance 100 Ω
- Number of Wires 3
- Process Temperature, Max 230 °C
- Process Temperature, Min -60 °C
- Tip Diameter 0.4375 in
- Tip Thickness 0.125 in
- Wire Gauge 26 AWG
- Wire Type Stranded
Description
This flat "disc" encapsulated 100 ohm Class A DIN platinum RTD sensor is ideal for surface temperature measurements such as heat loss or compressor efficiency applications. The sensing end can be cemented into place for permanent mounting or can be adheredusing a single-side tape.When combined with Omega's extension cables, transmitters, controllers, dataloggers, thermometers or temperature displays, these sensors become the heart of a complete temperature control and monitoring system.
PDFs & Manuals
Show Ratings & Reviews
Rated 4 out of
5
by
LDM_Rory from
Great sensors
They are great sensors. They act as you would expect a pt100 to act, they're unobtrusive, and so far have been reliable. I use wide zipties to hold them in position while the epoxy cures over the day.
However I have no need for the connectors. A connector like that is asking for a failed connection in the environments I work in. I would prefer no connector or have an M12 connector directly attached to the puck. The insulation could also be thicker but that seems standard for many of these sensors with wires from Omega.
Date published: 2019-02-16
What is the size of the sensor disk?
Thank you for connecting with Omega! The sensor disc is: 11 mm (7⁄16") diameter, 3 mm (1⁄8") thick sensor for surface mounting and can be cemented into place for permanent mounting or fixed using adhesive tape. Let us know if you need any further assistance.
Date published: 2019-05-08
How can mount this on vertical vibrated surface ? do we need to use adhesive or silicon ,or is it magnetic ?
Thank you for your inquiry. This RTD is not vibration rated so it cannot be used on a vibrating surface. It is not magnetic. You need to use a thermally conductive epoxy adhesive or a cement to bond it to the surface.
Date published: 2024-08-16
After this sensor is attached to a surface, how can this be calibrated?
Thank you for your inquiry. We believe the best assistance would come from speaking to us directly at 888-826-6342 ask for the Temperature Department Mon. – Fri. (HOURS 8:30AM - 5:30PM EST).
Date published: 2023-05-02