1-800-663-4209 | Vos commentaires sont importants, répondez à un sondage rapide commentaires sur le site web
PX51-IS
Transmetteurs de Pression à Sécurité Intrinsèque Pour Sites Dangereux, Modèle Standards
PX51-IS
Depuis
C$
0.00
L'aperçu du produit
Afficher les notes et les avis
What is the response rate of the pressure transducer. We would like at least 1kilohertz. We usually buy Drucks with 3kHz response.
Thank you for your inquiry, this unit has a 1 millisecond response time
Date published: 2021-11-09
Do the nameplates on these units include the words "single seal" or "dual seal"? If not, then we'd need to utilize a separate secondary process seal for compliance with NEC 501.17. Thanks.
Our device does not rely on a seal, they are fully welded, there is no path that relies on a seal to prevent the process fluid from reaching the electronics of the device, so no additional sealing is required.
In addition, The construction has many fails safes in addition to being separated by welded material. In the event of the MEMS device failing, an overload surface restrains the stainless still diaphragm from rupturing.
Date published: 2019-08-02
Do you have a barrier that is known to work or has been tested with the Intrinsically Safe version?
Thank you for your inquiry. We do not offer any intrinsically safe barriers for a 4 to 20mA output device. You will have to source a barrier from a supplier of this type of product.
Date published: 2020-04-28
Does this device have any sort of overpressure rating? Thanks.
Thank you for your inquiry. Safe overpressure rating is 150% of the rated pressure range. Burst pressure rating is 300% of the rated range
Date published: 2021-01-28