Need assistance? Call us: 1-800-663-4209
DCP-485-S
Fully Isolated RS-232/RS-485 Converters
Choose a Variant
Input Cable Connector Type
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Altitude | 15000 ft |
| Baud Rate | 115.2 K, 57.6 K, 38.4 K, 19.2 K, 9.6 K, 4.8 K, 0 to 2.4 K |
| Capacitance | 25 pF per foot |
| Capturing Mode | Asynchronous 4–wire duplex, 2–wire half duplex, 2–wire simplex |
| Channels | (1) TD, RD |
| Controller Options | (1) RTS, DTR |
| Current Output | 28 mA max/output |
| Data Interface | RS232 DB 9-Pin Connector Female, RS 485 |
| GrossWeightValue | 0.15 |
| Height | 4.3 in |
| Impedance Input | 12 kΩ min/input |
| Input Cable Connector Type | RS232: 9 - Pin Female D-Sub |
| Input Type | RS232 |
| Isolation | Surge: 6000 Vdc, 1 min, Continuous: 1500 Vrms |
| Length | 0.89 in |
| MTBF | (2) >100,000 hrs |
| Mounting | DIN-Rail Mounting |
| Multidrop Units, Max | 32 |
| Null Modern Switch Note | 1 (Reverses RS232 pins 2 and 3) |
| Number of Channels | 1 |
| Operating Temperature, Max | 60 °C |
| Operating Temperature, Min | 0 °C |
| Output Cable Connector Type | RS485: Pluggable solderless screw terminals |
| Protection | Mode Surge Protection: (dc input and RS232 inputs and outputs, RS485 inputs and outputs) |
| Relative Humidity | 0 to 95% RH, Non-Condensing |
| Series ID | DCP-485 |
| Spec Sheet QR URL | https://www.dwyeromega.com/en-us/fully-isolated-rs-232-rs-485-converters-1-5-kv-isolation/DCP-485/p/DCP-485-S?guid=701a700000ulrduaaq&utm_source=spec-sheet&utm_medium=qr-code&utm_campaign=prd-sku-spec-sheet&utm_content=auto-generated-sku-level-spec-sheet |
| Storage Temperature, Max | 70 °C |
| Storage Temperature, Min | 0 °C |
| Supply Power Type | DC |
| Supply Voltage | 10 to 30 Vdc |
| Switch Note | TD Term - switches a 120 Ω termination resistor across the RS485 transmit data lines TD A & TD B. RD Pull Up/Term/Pull Dn - RD Term switches a 120 Ω termination resistor across the RS485 receive data lines. RD Pull Up & RD Pull Dn switch a pull up resistor to RD B’ and a pull down resistor to RD A’, respectively. TD Cont En/Ctrl’d - select continuous enable or RS232 side signal control of the RS485 transmitter. RD Cont En/Ctrl’d - select continuous enable or RS232 side signal control of the RS485 receiver. |
| Switch Type | TD Term, RD Pull Up/Term/Pull Dn, TD Cont En/Ctrl’d |
| Transmission Distance | 1.3 km, 1.5 km, 1.6 km, 4.2 km, 5.6 km, 6.4 km, 11.3 km |
| Weight | 130 g |
| Width | 3.3 in |
| Country of Origin | United States |
| See All Specs | |
PDFs & Manuals
Show Ratings & Reviews