Need assistance? Call us: 1-800-663-4209
LVC152
Economical Capacitance Level Switches Selectable NO or NC
Models In Stock
- Reliable Detection of Conductive, Light to Medium Coating Liquids
- Unique Coating Circuit Rejects the Negative Effects of Coating or Scaling Build-up
- All Plastic Construction with PP Materials for Corrosive Environments
- Probe and Cable Rated IP68 or NEMA 6 for Submersible Operation in Tanks or Sumps
LVC152
From
C$
572.44
Models In Stock
Product Overview
- Accuracy ± 0.04 inH2O
- Approvals CE, RoHS
- Cable Length 10 ft
- Conductive Range > 100 µS/cm
- Dielectric Range >20 constants
- Enclosure Ratings IP66, NEMA Type 4
- Immersion Depth 2.6 in
- Insulation PVC
- Materials, Wetted Polypropylene
- Media Compatibility Clean process / cooling water, Oils / lubricants, Organic solvents
- Number of Wires 4
- Operating Pressure, Max 150 psi
- Operating Pressure Note 150 psi @ 25°C (76°F), derated @ 1.667 psi per °C above 25°C (76°F)
- Operating Temperature, Min -40 °C
- Power Consumption 25 mA
- Probe Diameter 0.75 in
- Probe Length 5 in
- Process Connection Size 3/4 in
- Process Connection Type NPT Male
- Repeatability ± 0.02 inH2O
- Series ID LVC152
- Supply Power Type DC
- Supply Voltage 12 to 36 Vdc
- Switch Operation Selectable Normally Open or Normally Closed
- Switch Rating 1 A @ 60 or 120 Vac/Vdc
- Switch Type SPST
- Wire Gauge 22 AWG
Supported Applications
The Omega LVC-152 series consists of economical capacitance level switches designed for the reliable detection of conductive, light to medium coating liquids. The unique coating circuit rejects negative effects from coating or scaling build-up. These submersible sensors are constructed entirely of plastic with Polypropylene (PP) materials, making them suitable for corrosive environments in tanks and sumps.
According to the application matrix, the LVC-152 series is compatible with:
- Foam
- Bubbles
- Conductive liquids
- Translucent or opaque media
- Clean and turbulent conditions
- Metallic and non-metallic tanks
The series is not indicated for non-conductive, dirty, heavy coating applications, or hazardous locations.
Operating Conditions & Performance
The LVC-152 operates within a process temperature range of -40 to 90°C (-40 to 194°F). The sensor and cable are rated NEMA 6X (IP68) for submersible operation. Pressure capability is specified as 150 psi @ 25°C (76°F), derated at 1.667 psi per °C above 25°C (76°F).
Performance specifications include an accuracy of ±1 mm (0.04") in water and repeatability of ±0.5 mm (0.02") in water. The device requires a power supply of 12 to 36 Vdc.
Installation Constraints
A critical installation requirement is that the sensor must not be installed within 15.24 cm (6") of any metal object.
Configuration Options
The LVC-152 series features a selectable output state, configurable as Normally Open (NO) or Normally Closed (NC). The standard configuration includes an SPST relay contact and comes complete with a 3 m (10') cable. Extended cable lengths are available for special ordering: 7.62 m (25') by adding the suffix '-25' to the model number, or 15.24 m (50') by adding the suffix '-50'.
Key construction and connection details include:
- Housing Material: Polypropylene
- Process Connection: ¾ NPT
- Overall Length: 12.7 cm (5.0")
- Insertion Length: 7 cm (2.6") from the bottom of threads to the tip of the probe
- Cable Specification: 4-wire, 22 gauge with ground and shield, PP jacket
The series holds CE and RoHS certifications.
Key Product Differences
The primary model in this series is the LVC-152-R, described as a capacitance switch 12.7 cm (5") long. The standard unit includes a 3 m (10') cable; variations are achieved by appending suffixes for extended lengths (-25 or -50) to order longer cables.
