Need assistance? Call us: 1-800-663-4209
EA2-TX-M12
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accessory Type | Flange for 5/8” 18 UNF & 3/4” 16 UNF process connections |
| Accuracy | ± 2 °C (± 3.6 °F) |
| Accuracy Detail | ±2°C (±3.6°F) dew point |
| Applications | Air, Air Dryers, Chemical Refineries, Clean Rooms, Clean Water and Purified Solutions, Compressor Control, Filter Monitoring, Flow Measurement, Gases, HVAC, Industrial and Manufacturing, Natural Gas Compressors, Power Plants & Boilers, R&D/Engineering Testing, Refrigeration, Refrigeration Equipment, Temperature Maintenance, Waste Water Applications |
| Calibration Note | Traceable 13-point calibration certificate |
| Compensated Temperature, Max | 50 °C |
| Compensated Temperature, Min | -20 °C |
| Compliance Note | ATEX/UKCA: II 1 G Ex ia IIC T4 Ga (-20 to +70 °C) IECEx: EX ia IIC T4 Ga (-20 to +70 °C) TR CU @ 0Ex ia IICT4 Ga (-20 to +70 °C) cQPSus: Class I, Division 1, Groups A, B, C & D, T4 Class I, Zone 0, AEx ia IIC T4 Gb, Ex ia IIC T4 Gb Tamb +70 °C |
| Dimensions Note | M12 5 pin L = 155mm x ø45mm (with connector cable) |
| Electrical Connection | M12 5 pin Male |
| Electrical Output | 4 to 20 mA |
| Enclosure Ratings | IP65 |
| Factory Setting | Sensor fault: 23 mA; Under-range dew point: 4 mA; Over-range dew point: 20 mA |
| Flow Rate Note | 1 to 5 Nl/min mounted in standard sampling block; 0 to 10 m/sec direct insertion |
| Galvanic Isolation | KFD2-CR-EX1.20200,KFD2-CR-EX1.30200,KFD0-CS-EX1.50P,KFD0-CS-EX2.50P,KFD2-STC4-EX1.H,MTL5041,MTL5040 |
| Height | 155 mm |
| Housing Material | 316 Stainless Steel |
| Length | 45 mm |
| Load Resistance | Max 250 Ω @ 14 V (500 Ω @ 24 V) |
| Operating Pressure, Max | 52.5 MPa |
| Operating Temperature, Max | 60 °C |
| Operating Temperature, Min | -40 °C |
| Repeatability | 0.5°C (0.9°F) dew point |
| Response Time | 5 mins to T95 (dry to wet) |
| Series ID | EA2-TX-M12 |
| Storage Temperature, Max | 60 °C |
| Storage Temperature, Min | -40 °C |
| Supply Current | 23 mA |
| Supply Voltage | 12 to 28 Vdc |
| Weight | 150 g |
| See All Specs | |
Show Ratings & Reviews