Need assistance? Call us: 1-800-663-4209
HX200-Srs-TRH-Sig-Cond
Duct, Wall, Remote Mount Temp, Humidity, & Dewpoint Transmitters
Models In Stock
- High Accuracy with Certificate of Calibration
- High Temperature Sensor to 200°C (392°F) (at 0% RH)
- High Pressure Sensor to 750 psi (51.7 bar)
- Switchable for Dew Point or Humidity
HX200-Srs-TRH-Sig-Cond
From
C$
1,549.91
Models In Stock
Product Overview
- Accuracy ± 1 °C (± 1.8 °F)
- Accuracy Detail ± 1.0°C from -20 to 40°C (-4 to 104°F); ± 3.0°C below -20°C (-4°F)
- Additional Features 1 NIST traceable calibration certificate included, Selectable C or F
- Dew Point Temperature, Max 40 °C
- Dew Point Temperature, Min -60 °C
- Display Type 2 line LCD
- Electrical Output 4 to 20 mA
- Filter Stainless Steel
- Length 88.9 mm
- Mounting Holes Center Length 78.7 mm
- Operating Temperature, Max 200 °C
- Output Detail Single Output: 4 to 20 mA loop powered (relative humidity or dew point)
- Pressure Limits Up to 750 psi
- Measurement Pressure, Min 0 psi
- Pressure Note Maximum Sensor Pressure Rating
- Probe Diameter 1.27 cm
- Probe Length 10.16 cm
- Process Connection Size 1/2 in
- Process Connection Type NPT Male and Female
- Relative Humidity 1 to 95%
- Resolution 0.1
- Sensor Material 304 Stainless Steel
- Series ID HX200-Srs-TRH-Sig-Cond
- Supply Power Note 4 to 20 mA loop powered, 2-wire 24 Vdc (typical) 12 to 28 Vdc
- Supply Power Type Loop Powered
- Supply Voltage 12 to 28 Vdc
- Weight 1.8 kg
- Width 63.5 mm
The HX200 is a high accuracy calibrated dew point or humidity transmitter. The remote sensor is designed to work at temperatures as high as 200°C (392°F). This high accuracy sensor is also built to withstand up to 750 psi. These transmitters are perfect for applications such as compressed air, dryers and environmental chambers.
PDFs & Manuals
Show Ratings & Reviews
Rated 5 out of
5
by
Dean Friesen from
Excellent product.
Easy to incorporate in our system, operates flawlessly.
Date published: 2017-12-05
Rated 5 out of
5
by
humiditymeasurement from
can be connected to daq
got this for measuring inlet temperature and RH. can be connected to daq
Date published: 2022-09-12
Rated 4 out of
5
by
Fibreman12345 from
Good product
Using 4 to monitor dew point in compressed air system. Using a rs232 to ethernet comverter to pull data into database. Works great.
Improvements to get 5 stars
1. Make the sensor replaceable by adding a plug
2. Replace power plug with a 5 pin m12 so you do not have to drill a hole in the housing to get serial communication out of unit.
Date published: 2018-08-03
Rated 5 out of
5
by
Copper from
works great in extreme environments
This instrument is more accurate than all of the other brands we have tried. It works great even through a high vibration environment where others fail
Date published: 2020-11-12
Rated 5 out of
5
by
rs1022 from
Works Great!
Just finished installing yesterday, easy set up. Being used in Dew Point mode, and switched over via internal dip switched. This unit is loop powered, so it will require a 24vdc separate power source.
Date published: 2018-08-21