Need assistance? Call us: 1-800-663-4209
DRSL-TC-Srs-Sig-Cond
DIN Rail Thermocouple Input Signal Conditioners | Low Profile
Models In Stock
- DRSL-TC Non-Isolated and DRSL-TC-ISO Isolated Models
- Accepts Type J and Type K Thermocouples
- Pre-Calibrated Temperature Ranges Selectable via Dip-Switches
- Slimline Housing—Only 6 mm (0.24') Wide
DRSL-TC-Srs-Sig-Cond
From
C$
246.92
Models In Stock
Product Overview
- Approvals CE, UL, RoHS
- Calibration Temperature, Max 28 °C
- Calibration Temperature, Min 20 °C
- Electrical Output 4 to 20 mA
- EMC Immunity Note NAMUR NE 21, A Criterion, Burst: <±1% of span (span = selected input range)
- EMC Standard NAMUR NE 21
- Enclosure Ratings IP20
- Height 113 mm
- Installation Pollution degree 2 and measurement/overvoltage category II
- LED Indicators Green LED indicates operational status of the unit and input sensor
- Length 115 mm
- Load Resistance Voltage Output :>10 kΩ min,;Current Output: 21 mA/600 Ω /12.6V max
- Mounting DIN Rail 35 mm Standard, EN 60715
- Operating Temperature, Max 70 °C
- Operating Temperature, Min -25 °C
- Output Value Process
- Power Consumption 0.7 W, Internal - 0.65 W
- Relative Humidity 0 to 95% RH (non-condensing)
- Screw Terminal Torque 0.5 Nm
- Series ID DRSL-TC-Srs-Sig-Cond
- Stability Load Stability: ≤0.01% of span/100 Ω
- Storage Temperature, Max 85 °C
- Storage Temperature, Min -40 °C
- Supply Power Type DC
- Weight 70 g
- Width 6.1 mm
- Wire Gauge 26 to 12 AWG
Supported Applications
The Omega DRSL-TC Series consists of low-profile DIN rail signal conditioners designed to interface thermocouple inputs with SCADA systems or PLC equipment. The series accepts Type J and K thermocouples, converting them into unipolar analog signals suitable for data acquisition applications.
Operating Conditions & Performance
The DRSL-TC Series operates within an ambient temperature range of -25 to 70°C (-13 to 158°F) and supports storage temperatures from -40 to 85°C (-40 to 185°F). Humidity ratings are specified as 0 to 95% RH non-condensing. Accuracy performance varies by model: the DRSL-TC provides better than 1.0°C or ±0.1% of selected input range, while the DRSL-TC-ISO offers better than 0.5°C or ±0.05% of selected input range.
Measurement ranges cover Type J from -100 to 1200°C (-148 to 2192°F) and Type K from -180 to 1372°C (-292 to 2501°F). Response time is selectable at <30 ms or 300 ms. The units carry CE, UL US, and RoHS approvals.
Configuration Options
The series includes two primary configurations: the DRSL-TC (non-isolated) and the DRSL-TC-ISO (isolated). Configuration is performed via DIP-switches with over 1000 factory-calibrated measurement ranges available. The slimline housing measures only 6 mm (0.24") wide, with overall dimensions of 113 H x 6.1 W x 115 mm D (4.4 x 0.24 x 4.5").
Available output signals include:
- Current Output: 0 to 20 mA and 4 to 20 mA
- Voltage Output: 0 to 10V, 2 to 10V, 0 to 5V and 1 to 5V
Power supply requirements are 16.8 to 31.2 Vdc via connectors for the DRSL-TC; the DRSL-TC-ISO accepts 16.8 to 31.2 Vdc via power rail or connectors. Electrical connections utilize screw terminals compatible with wire sizes from 0.13 x 2.5 mm² / AWG 26 to 12 stranded wire.
Accessories for the series include:
- DRSL-PWR-RAIL: Power rail (with cover and two end covers), 1 m length, for use with DRSL-TC-ISO only
- DRSL-PCU: Power connector unit, 24 Vdc/2.5 A output to power rail, for use with DRSL-TC-ISO only
- DRSL-MOD-STOP: Module stop screwed onto the power rail to support mounted devices
Key Product Differences
The series distinguishes between two model families based on isolation and surge suppression capabilities:
- DRSL-TC: Non-isolated thermocouple input DIN rail signal conditioner.
- DRSL-TC-ISO: Isolated thermocouple input DIN rail signal conditioner featuring 3-way isolation and surge suppression. This model supports power via the optional DRSL-PWR-RAIL system in addition to direct connectors.
PDFs & Manuals
Accessories
installation hardware
meters/controllers
Show Ratings & Reviews
Rated 5 out of
5
by
Anonymous from
Good product, easy to use.
Works great and easy to setup. I didn't use it on a DIN rail but it works fine standalone. The packaging is well done so you can just lay it on a bench or something and it works fine. I'd definitely buy it again anytime I need to log high rate thermocouple data.
Date published: 2024-10-27
Rated 5 out of
5
by
WillPVI from
Clean simple Thermocuple signal conditioner
Very flexible and easy to use. I bought both the isolated and non isolated versions. Small DIN rail footprint. Clear instructions. Just what I needed for a simple data acq project that needed a single thermocouple input.
Date published: 2023-12-31
Why is the drsl-temp option not showing up in the all models section?
DRSL-TEMP is a different series meant for thermocouples and RTD's, it will come up when you look for it on our search engine.
Date published: 2022-11-04